Model: upgraded HSH guitar pickup guard set. Material: Alnico 5 pickups, imported copper wire. Pickup DC resistance (approx.): Neck pickup: Alnico 5 humbucker, 7.5KΩ; hole spacing 50mm. Middle pickup: Single-coil pickup, 9.8KΩ; hole spacing 52mm. Bridge pickup: Alnico 5 humbucker, 14KΩ; hole spacing 52mm. (K resistors are for reference only and will vary with temperature) Circuit assembly: 3 CTS 500K potentiometers, 1V 2T; 4 single-pole switches; 1 boost switch; 2 CDE Orange capacitors; 1 Epi output jack. Functions and features: 5-way switch to get different styles of tone, perfect for upgrading any common guitar setup. APPLICATION: Fits most Fender Strat guitars. Difficulty to use: Simple, just solder the reserved wire to the spring claw of the guitar. Weight: 700g/set. Accessories: 11 screws. Added Functions:
5-position switch: when the 5-position switch is placed in the first position, the neck pickup works. When the boost switch is pressed at this time, the neck + bridge pickups will work at the same time. 5-Position Switch: When the 5-position switch is placed in the second position, the neck + middle pickups work together, at this time, press the enhancement switch, the neck + middle + bridge pickups will work at the same time. INDIVIDUAL SINGLE-KNIFE SWITCH: Each pickup has an independent single-knife (push-pull) switch. After turning on the single knife switch, if the single knife does not sound good, it may be better to use the compensation switch. The stainless steel mute switch (also known as the output mute switch) button allows you to mute the sound of the guitar without adjusting the volume knobs or pedals by quickly pressing the button while playing to produce a stuttering effect that stops the sound output of the electric guitar, but maintains the electrical signal produced.