(High-flow pump) High power requirements

1. Product name: R385 DC diaphragm pump

2. Product code: RB-04M061

3. Pump dimensions: 90 mm × 40 mm × 35 mm

4. Outlet diameter: Inner diameter 6 mm, outer diameter

9mm

5. Operating Voltage: DC 6-12V (Recommended: 9V 1A, 12V

1A)

6. Operating Current: 0.3-0.7A

7. Flow Rate: 1.5-2 L/min (approximately)

8. Suction Head: 2 metres

9. Discharge Head: 3 metres

10. Lifespan: Up to 2,500 hours

11. Water Temperature: Up to 80°C

12. At 6V voltage: power is 6W/h (Note: four AA batteries

cannot power it)

Regarding 6V power supply, the standard is that the power

reaches 6W, meaning the current is 1A or above. Remember:

Four AA batteries cannot power it, some mobile phone

chargers cannot power it, USB cables connected to any

device, and 9V disposable batteries also cannot power it. 6V

1A (sufficient current) or higher power supplies are

acceptable!

Usage Environment and Precautions:

1. The water pump is generally suitable for use with tea

kettles and water pumps;

2. It is not suitable for prolonged operation, as excessive

head or suction lift can damage the pump;

3. The water pump is not suitable for use in situations where

the inlet water pressure is high or the outlet resistance is

high, as it is not a pressure-boosting pump and is not

pressure-resistant;

4. The inlet and outlet ports of the water pump are suitable

for use with silicone tubing; do not use PVC tubing or

tubing with corrosive liquid adhesives;

5. The entire unit must not come into contact with water

(including water vapour or humid environments);

6. Liquid requirements: ordinary clean water (must not

contain impurities, viscous substances, or corrosive liquids).

List:

Water pump *1