Product Appearance
The product is covered with a film to prevent scratches and damage. Be sure to remove this film before installing the product on your guitar.
Product Specifications
Material: Alnico 5 pickup, imported copper wire
Pickup DC resistance (approx.):
Neck pickup: Alnico 5 humbucker, 7.5KΩ, hole spacing 50mm
Middle pickup: Single-coil pickup, 9.8KΩ, hole spacing 52mm
Bridge pickup: Alnico 5 humbucker, 14KΩ, hole spacing 52mm
Note: KΩ resistors are for reference only and will change with temperature changes
Other components:
3 potentiometers (1V2T)
2 single-pole switches
1 x Enhanced Function Switch
1 orange capacitor
1 output jack
Functional features: 5-position switch for different styles of tones, ideal for upgrading the configuration of ordinary guitars.
Scope of application: suitable for most ST guitars
Difficulty to use: simple, just solder the reserved wires to the spring claw of the guitar
Weight: 700g/set
Accessories: 11 screws
Important Tips
In addition to the original functions, the four single-pole switches and one enhanced function switch bring the following new functions:
When the 5-position switch is placed in the first position, the neck pickup works. When the enhancement function switch is pressed at this time, the neck and bridge pickups will operate simultaneously.
When the 5-position switch is placed in the second position, the neck and middle pickups operate simultaneously. Pressing the Enhance switch at this time will cause the neck, middle and bridge pickups to operate simultaneously.