Application:
It is suitable for high-speed mixing, dissolving and dispersing of liquid and liquid-powder phase materials in the fields of coating, dyestuff, printing ink, pigment, cosmetic, resin, adhesive, emulsion, medicine, petroleum, etc. The speed can be adjusted at will.
It is suitable for high-speed mixing, dissolving and dispersing of liquid and liquid-powder phase materials in the fields of coating, dyestuff, printing ink, pigment, cosmetic, resin, adhesive, emulsion, medicine, petroleum, etc. The speed can be adjusted at will.
Specifications:
Instructions:
1. Place the ink tank that needs to be stirred on the machine and automatically clamp it with the clamping device through the red ball head;
2. Connect the power cord at the back of the chassis, turn on the main power switch, and the indicator light is on;
3. The time setting control is adjusted to the time that needs to be stirred;
4. The forward and reverse switch is pressed up or down from the middle (forward and reverse);
5. When the governor switch is turned on, the green LED indicator above the governor is on, and the knob is turned to the right to adjust the speed from low speed to high speed;
6. When the time is up, the red indicator on the time controller will light up, indicating that the mixing process is complete. If you need to extend the mixing at this time, you must turn off the main power switch and turn it on again;
7. After the mixing is complete, turn off the motor switch, the forward and reverse switch, and then turn off the main power switch, and then take out the ink tank;
8. The steel spatula should be cleaned after the equipment is finished.
1. Place the ink tank that needs to be stirred on the machine and automatically clamp it with the clamping device through the red ball head;
2. Connect the power cord at the back of the chassis, turn on the main power switch, and the indicator light is on;
3. The time setting control is adjusted to the time that needs to be stirred;
4. The forward and reverse switch is pressed up or down from the middle (forward and reverse);
5. When the governor switch is turned on, the green LED indicator above the governor is on, and the knob is turned to the right to adjust the speed from low speed to high speed;
6. When the time is up, the red indicator on the time controller will light up, indicating that the mixing process is complete. If you need to extend the mixing at this time, you must turn off the main power switch and turn it on again;
7. After the mixing is complete, turn off the motor switch, the forward and reverse switch, and then turn off the main power switch, and then take out the ink tank;
8. The steel spatula should be cleaned after the equipment is finished.
Package includes:
1 x Ink Mixer ( with UK plug )
1 x Ink Mixer ( with UK plug )
