eBay

Pre-soldered SMD micro LEDs, ideal for model making.

The LEDs are a high quality with skilled workmanship to solder the wires - if you've ever tried to do this, you will know how difficult and time consuming it is.

Note : These LEDs are not fitted with a resistor. Resistors are needed if you intend to power the LED with a higher voltage than the specified forward voltage. We stock a full range of suitable resistors in our eBay shop.

Pack Size: 1 or 5 (select in listing options)

LED Colour : As selected in listing options

LED Size : 0402, 0603, 0805 or 1206 (select in listing options)

Material : InGaN

Lenses Type : Clear

Viewing Angle : 120deg

Wire Length : Approx 300mm

Wire Diameter : 0.28mm

Forward Current : 20mA (typical), 30mA (max)

Forward Voltage : ~2v or ~3.6v (depends on colour - see table below)

Size 0402 : 1.0mm (L) x 0.5mm (W) x 0.5mm (H)

Size 0603 : 1.6mm (L) x 0.8mm (W) x 0.6mm (H)

Size 0805 : 2.0mm (L) x 1.25mm (W) x 0.6mm (H)

Size 1206 : 3.2mm (L) x 1.6mm (W) x 0.6mm (H)

Colour	Type	Wavelength	Forward Voltage	Brightness
Red	0402	625nm	2.0v – 2.2v	100mcd
	0603	625nm	2.0v – 2.2v	250mcd
	0805	625nm	2.0v – 2.2v	250mcd
	1206	625nm	2.0v – 2.2v	250mcd
Blue	0402	465nm	3.2v – 3.8v	100mcd
	0603	465nm	3.2v – 3.8v	475mcd
	0805	465nm	3.2v – 3.8v	475mcd
	1206	465nm	3.2v – 3.8v	475mcd
White	0402	-	3.2v – 3.8v	100mcd
	0603	-	3.2v – 3.8v	500mcd
	0805	-	3.2v – 3.8v	500mcd
	1206	-	3.2v – 3.8v	500mcd
Warm White	0402	-	3.2v – 3.8v	100mcd
	0603	-	3.2v – 3.8v	500mcd
	0805	-	3.2v – 3.8v	500mcd
	1206	-	3.2v – 3.8v	500mcd
Green	0402	520nm	3.2v – 3.8v	150mcd
	0603	520nm	3.2v – 3.8v	250mcd
	0805	520nm	3.2v – 3.8v	250mcd
	1206	520nm	3.2v – 3.8v	250mcd
Yellow	0402	590nm	2.0v – 2.2v	150mcd
	0603	590nm	2.0v – 2.2v	250mcd
	0805	590nm	2.0v – 2.2v	250mcd
	1206	590nm	2.0v – 2.2v	250mcd
Orange	0603	605nm	2.0v – 2.2v	250mcd
	0805	605nm	2.0v – 2.2v	250mcd
	1206	605nm	2.0v – 2.2v	250mcd