Description:

Unplug your microwave before attempting this repair. You will need to remove the grill, which is held into place by two screws at the top of the grill (open your microwave door before doing this). Remove the grill. Remove the screw on the left holding the control panel in place. Loosen the screw behind the panel. You should now be able to lift the panel up and pull forward to detach. You will find the door switch by removing the screws to detach the switch assembly. Press on the release tab to remove the middle switch. Disconnect the wire connector to release the old switch.

The door switch is normally closed.

This part works with the following brands: General Electric, Hotpoint, Kenmore

This part works with the following products: Microwave, Microwave Oven Combo, Range

This part fixes the following symptoms:

Doesn’t shut off

Won’t turn on

No heat