Excellent-auto2022

4PCS 6X135 WHEEL SPACERS 2 INCH HUBCENTRIC For FORD F150 EXPEDITION NAVIGATOR

Wheel Adapter Specifications：
Thickness  2 inch 
Center Bore Size  87mm 
Vehicle Bolt Pattern  6x135mm 
Wheel Bolt Pattern  6x135mm 
Thread Type  M14x2

 

Fiitment:
Ford Expedition 2003-2014
Ford F-150 2003-2014
Lincoln Mark LT 2006-2008&2010-2014
Lincoln Navigator 2003-2014

Package include:

4  Pcs Wheel Spacers Adapters

 

How to choose the correct wheel spacers:


STEP. Check 3 specifications
The following is the easy and simple way to check the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.


1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)

2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.


3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.

How to install the wheel spacers:

 

1). IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER! Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.


2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.


3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.


4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.


5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.


Item Specifics
Brand KYX
Manufacturer Warranty 5 Year
Manufacturer Part Number 6x135-2"-87.1-14x2
Vehicle Bolt Pattern 6x135mm or 6x5.3 inch
Wheel Bolt Pattern 6x135mm or 6x5.3 inch
Thread Size 14mm x 2.0 or 14x2.0 or M14x2.0
Color Black
Hubcentric Yes
Material High Quality t6 6061 Billet Aluminum
Stud Grade 10.9
Type Wheel Spacer
Thickness 50mm or 2 inches or 2"
Center Bore 87.1mm or 3.4inch
Lug Patterns 6 Lugs
Torqued Down By Hand At 120 Ft/Lb
Quantity (4) Spacers Adapters

Payment

1.We only accept payment from Paypal. 

2.Please make sure you have a valid/confirmed PayPal account prior bidding. All PayPal Payments 

must be Confirmed (Shipping and billing addresses must match).

3.Payment  Should be Completed within 7 days ,or an unpaid disputed will be opened as payment 

none receive.

Shipping
1. All items will be shipped within 1 business day upon receipt of payment.
 
2. It usually takes approximately 3-7 business days to receive order, not include weekend and holiday.
 
3. Delivery time depends on postal process and other factors;
 
4. If you do not receive your item on time, please contact us immediately for further assistance. We will be 
 
responsible for any damages or losses incurred in the shipping process.
 
5. Seriously promise:
 
Refund or resend will be offered if item still not arrive in 10 business days. Just send us an email ,
we will give you a satisfied solution as soon as possible
Returns
If you send email to us,In our working hours will be resumed within 24 hours.
 
Please feel free to contact us if you have any questions:
 
Dear my friend,we appreciate your support.And our goal is service you well and give you a pleasant shopping time in our store.
 
1.Not receive in time;
 
2.Item broken;
 
3.Not satisfied with the item.
 
we will try our best to handle it well within 24hours,except International Holiday.
Contact Us
If you have any question or concern about your order, please feel free to contact us.
 
We will strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
Warranty
1.Customer satisfaction is very important to us and our feedback rating reflects this satisfaction.If you have any question or concern,please contact us via ebay message;
 
 
2.We fully guarantee customers an exchange or refund within 30 business days of receipt if item DOA (damage on arrival);
 
 
3.Warranty excludes normal product lifetime wear-out,wear and tear or abuse;
 
 
4.Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration;
 
 
5.For malfunction products under warranty period, please contact our customer service via EBay Message.

Excellent-auto2022
Shop Category
 Store Home
 Car Catalytic Converter
 Car Air Intake System
 Car Turbo Turbocharger
 Car Wheel Spacers
 Car Shock Absorbers
 Intercooler & Heater & Other
 Promotion Products
 Car Belt Tensioner
 Other
Hot Item
Picture

content_src_url

New List Item
Help & Info
Payment Policy
Shipping Policy
Return Policy
FAQ
About Us

Front Left Brake Caliper For 1993-1995 Jeep Wrangler 1997-2002 Cherokee 184340

Features & Details

Items Included: 1x Front Left caliper - 184340
Color: Silver
Manufacturer Part Number: Does not apply
Piston Diameter: 2.60in
Mounting Hardware Included: Mounting Hardware
Material: Steel
Superseded Part Number: 18FR984
Placement on Vehicle: Front, Left
Bleeder Thread Diameter: 3/8x24
Brand: KAC
Type: Brake Caliper
Interchange Part Number: 18FR984
Inlet Thread Diameter: 3/8x24
OE/OEM Part Number: 184340,5252610,5252985,19141223
Manufacturer Warranty: 5 Years
Piston Material: Phenolic
Universal Fitment: No
Finish: Zinc Plated
Piston Quantity: 1
Performance Part: No

Fitment

For Jeep：
Jeep Wrangler 1990-1992 All engine
Jeep Wrangler 1993-1995 All engine
Jeep Wrangler 1997-2002 All engine
Jeep Wrangler 2003 L4 2.4L (SubModel:SE)
Jeep Wrangler 2003 L6 4.0L (SubModel:Rubicon; Sahara; Sport)
Jeep Wrangler 2004 L4 2.4L (SubModel:SE)
Jeep Wrangler 2004 L6 4.0L (SubModel:Sport; Unlimited; X)
Jeep Wrangler 2005 L6 4.0L (SubModel:X)
Jeep Wrangler 2006 L6 4.0L (SubModel:Sport; Unlimited; Unlimited Rubicon)
Jeep Cherokee 1990 L6 4.0L (SubModel:Base; Laredo; Limited; Pioneer; Sport)
Jeep Cherokee 1990-1992 L4 2.5L
Jeep Cherokee 1991-1992 L6 4.0L (SubModel:Base; Briarwood; Laredo; Limited; Sport)
Jeep Cherokee 1993-2000 L4 2.5L
Jeep Cherokee 1993-2000 L6 4.0L
Jeep Cherokee 2001 All engine
Jeep Grand Cherokee 1993 L6 4.0L (SubModel:Base; Laredo; Limited)
Jeep Grand Cherokee 1993 V8 5.2L (SubModel:Base; Laredo; Limited)
Jeep Grand Cherokee 1995 L6 4.0L (SubModel:SE)
Jeep Grand Cherokee 1996 V8 5.2L (SubModel:Laredo)
Jeep Grand Cherokee 1997 V8 5.2L (SubModel:Limited; Orvis; TSi)
Jeep Grand Cherokee 1997 L6 4.0L (SubModel:Orvis; TSi)
Jeep Grand Cherokee 1998 L6 4.0L (SubModel:Limited)
Jeep Grand Cherokee 1998 V8 5.2L (SubModel:TSi)
Jeep Comanche 1990 L4 2.5L
Jeep Comanche 1990 L6 4.0L
Jeep Comanche 1991 All engine
Jeep Comanche 1992 L4 2.5L
Jeep Comanche 1992 L6 4.0L
Jeep Grand Wagoneer 1993 All engine
Jeep Wagoneer 1990 All engine

What's Included

1x Front Left caliper - 184340


Key Benefits

- High-quality construction: Made from durable steel and featuring a zinc-plated finish to ensure longevity and corrosion resistance.
- Reliable performance: Designed with a piston diameter of 2.60 inches and equipped with a phenolic piston material to provide efficient braking power.
- Comprehensive mounting solution: Comes with all necessary mounting hardware for a straightforward installation.
- Enhanced fitment: Specifically engineered for fitments on 1997-2002 Jeep Wrangler all engines, 1993-2000 Jeep Cherokee L6 4L, and 1993-1995 Jeep Wrangler all engines.


Installation Guide

- Ensure the vehicle is securely lifted and supported before attempting installation.
- Remove the old caliper from the front left side of the vehicle.
- Install the new caliper by aligning it with the mounting points on the vehicle.
- Attach the mounting hardware and secure it tightly.
- Reconnect the brake line, and ensure all connections are secure to prevent leaks.
- Perform a brake bleed procedure to remove any air from the brake system.
- Test the brakes for proper function before taking the vehicle for a drive.


Important Notes

- Confirm compatibility with your vehicle model by referring to the OE numbers: 18FR984, 184340, 5252610, 5252985, 19141223.
- The caliper is not universally fitting; verify it is designed specifically for your vehicle's model and year.
- Manufacturer warranty covers a period of 5 years from the date of purchase.
- Improper installation may lead to malfunction; professional installation is recommended for optimal performance.

1.We only accept payment from Paypal. 

2.Please make sure you have a valid/confirmed PayPal account prior bidding. All PayPal Payments 

must be Confirmed (Shipping and billing addresses must match).

3.Payment  Should be Completed within 7 days ,or an unpaid disputed will be opened as payment 

none receive.

1. All items will be shipped within 1 business day upon receipt of payment.
 
2. It usually takes approximately 3-7 business days to receive order, not include weekend and holiday.
 
3. Delivery time depends on postal process and other factors;
 
4. If you do not receive your item on time, please contact us immediately for further assistance. We will be 
 
responsible for any damages or losses incurred in the shipping process.
 
5. Seriously promise:
 
Refund or resend will be offered if item still not arrive in 10 business days. Just send us an email ,
we will give you a satisfied solution as soon as possible

1: Contact seller first by email

2: Send images : including outer package & scan label & item itself & with complete accessories etc
necessary condition:
one : Items have not been used.
two : Outer package without any damage.

3: For returns, please contact customer service for a return shipping label.

4: Item delivered -payment repay

1. Returns or exchanges will be subject to a 15% restocking fee on the original purchase.

2. Returns or exchanges due to shipping issues will be borne by the seller

Priority：
In the following cases, the shipping cost will be undertake by buyers
1: Order accidently
2: Find better price
3: Change mind

Notice：
Accessory missing/ quality issue/ shipping damage.etc 
Please contact us for good solution first instead of opening return dispute. Our professional customer service team can give you a satisfactory solution!

If you have any question or concern about your order, please feel free to contact us.
 
We will strive to providing the greatest service and bringing the highest satisfaction to all of our customers.
1.Customer satisfaction is very important to us and our feedback rating reflects this satisfaction.If you have any question or concern,please contact us via ebay message;
 
 
2.We fully guarantee customers an exchange or refund within 30 business days of receipt if item DOA (damage on arrival);
 
 
3.Warranty excludes normal product lifetime wear-out,wear and tear or abuse;
 
 
4.Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration;
 
 
5.For malfunction products under warranty period, please contact our customer service via EBay Message.


Datacaciques