Description
E200 Preamplifier HiFi Fully Balanced Amplifier without Bluetooth Support Treble/Bass Adjustment
Features:
- Multiple optimizations of mature circuit architecture.
- E200 is a preamplifier with treble, medium, and bass frequency modulation functions, which can achieve fine tuning and correction adjustment of various frequency bands, making it very practical.
- The E200 also has a direct pass function, which can switch to skip tone circuits and achieve only high fidelity amplification.
- The remote control function is within reach, and the front-end design has remote control function: it can achieve remote control volume control, input selection switching and mute function, making the operation within reach.
- The Bluetooth version receiving component uses the current high-level Bluetooth 5.1 version and the Qualcomm QCC5125 chip from the United States, which almost supports all current Bluetooth lossless transmission formats: SBC AAC APTX LDAC high-level, and is equipped with a separate Bluetooth decoding chip PCM5102 to provide strong guarantee for high-quality audio output.
- APTX-LL solving latency issues is crucial for achieving audio and video synchronization in gaming and multimedia applications. Allow you to listen to the consistent sound quality of streaming music from commonly used media services.
- The starting point of excellence is the high point, with the addition of high-end imported audio electrolytic capacitors and for Nichicon HiFi supplements high-frequency low resistance electrolytic capacitors. The coupling capacitors use four 3.3UF for Siemens with pure and transparent sound.
- Excellent signal-to-noise ratio, low-noise precision stabilized power supply, equipped with fully sealed transformers and independent filtering power supply design at all levels, with the addition of high-temperature filtering electrolysis, it has been tested to achieve excellent dynamic response with ripple characteristics at the micro-volt level, providing an important foundation for good sound quality.
- Accurate reproduction of music details, using the classic 6-op amp amplifier circuit and a full range of wafer resistors, optimizing wiring for precise reproduction of music details.
- For ALPS potentiometer imported from Japan has stable consistency between the two channels, making it impossible to compare errors with ordinary instruments. It also has ultra-low sound distortion and high fidelity, making it the preferred choice for high-end audiophiles.
- Using high-end gold-plated interface resistors with low loss, low conductivity, and resistance to oxidation.
- Enjoy the fun of HiFi music with any combination, it is a front-end amplifier that needs to be paired with a back-end to drive the speaker. It can be used with different transistor back-end and electronic tube back-end.
Specification:
- Amplification: 6X
- THD: ≤0.003% (1kHz)
- Frequency response: 10Hz - 30kHz (±0.5dB)
- SNR: ≥110dB
- Input sensitivity: 255mV
- Input impedance: 50Kohms
- Input voltage: 220V (110V is optional)
- Product size: 333 x 245 x 61mm
- Net weight: 2.9kg
Package Included:
- 1 x Preamplifier
- 1 x Power Cable
- 1 x Remote Control
- 1 x User Manual
E200 Preamplifier HiFi Fully Balanced Amplifier without Bluetooth Support Treble/Bass Adjustment
Features:
- Multiple optimizations of mature circuit architecture.
- E200 is a preamplifier with treble, medium, and bass frequency modulation functions, which can achieve fine tuning and correction adjustment of various frequency bands, making it very practical.
- The E200 also has a direct pass function, which can switch to skip tone circuits and achieve only high fidelity amplification.
- The remote control function is within reach, and the front-end design has remote control function: it can achieve remote control volume control, input selection switching and mute function, making the operation within reach.
- The Bluetooth version receiving component uses the current high-level Bluetooth 5.1 version and the Qualcomm QCC5125 chip from the United States, which almost supports all current Bluetooth lossless transmission formats: SBC AAC APTX LDAC high-level, and is equipped with a separate Bluetooth decoding chip PCM5102 to provide strong guarantee for high-quality audio output.
- APTX-LL solving latency issues is crucial for achieving audio and video synchronization in gaming and multimedia applications. Allow you to listen to the consistent sound quality of streaming music from commonly used media services.
- The starting point of excellence is the high point, with the addition of high-end imported audio electrolytic capacitors and for Nichicon HiFi supplements high-frequency low resistance electrolytic capacitors. The coupling capacitors use four 3.3UF for Siemens with pure and transparent sound.
- Excellent signal-to-noise ratio, low-noise precision stabilized power supply, equipped with fully sealed transformers and independent filtering power supply design at all levels, with the addition of high-temperature filtering electrolysis, it has been tested to achieve excellent dynamic response with ripple characteristics at the micro-volt level, providing an important foundation for good sound quality.
- Accurate reproduction of music details, using the classic 6-op amp amplifier circuit and a full range of wafer resistors, optimizing wiring for precise reproduction of music details.
- For ALPS potentiometer imported from Japan has stable consistency between the two channels, making it impossible to compare errors with ordinary instruments. It also has ultra-low sound distortion and high fidelity, making it the preferred choice for high-end audiophiles.
- Using high-end gold-plated interface resistors with low loss, low conductivity, and resistance to oxidation.
- Enjoy the fun of HiFi music with any combination, it is a front-end amplifier that needs to be paired with a back-end to drive the speaker. It can be used with different transistor back-end and electronic tube back-end.
Specification:
- Amplification: 6X
- THD: ≤0.003% (1kHz)
- Frequency response: 10Hz - 30kHz (±0.5dB)
- SNR: ≥110dB
- Input sensitivity: 255mV
- Input impedance: 50Kohms
- Input voltage: 220V (110V is optional)
- Product size: 333 x 245 x 61mm
- Net weight: 2.9kg
Package Included:
- 1 x Preamplifier
- 1 x Power Cable
- 1 x Remote Control
- 1 x User Manual
Features:
- Multiple optimizations of mature circuit architecture.
- E200 is a preamplifier with treble, medium, and bass frequency modulation functions, which can achieve fine tuning and correction adjustment of various frequency bands, making it very practical.
- The E200 also has a direct pass function, which can switch to skip tone circuits and achieve only high fidelity amplification.
- The remote control function is within reach, and the front-end design has remote control function: it can achieve remote control volume control, input selection switching and mute function, making the operation within reach.
- The Bluetooth version receiving component uses the current high-level Bluetooth 5.1 version and the Qualcomm QCC5125 chip from the United States, which almost supports all current Bluetooth lossless transmission formats: SBC AAC APTX LDAC high-level, and is equipped with a separate Bluetooth decoding chip PCM5102 to provide strong guarantee for high-quality audio output.
- APTX-LL solving latency issues is crucial for achieving audio and video synchronization in gaming and multimedia applications. Allow you to listen to the consistent sound quality of streaming music from commonly used media services.
- The starting point of excellence is the high point, with the addition of high-end imported audio electrolytic capacitors and for Nichicon HiFi supplements high-frequency low resistance electrolytic capacitors. The coupling capacitors use four 3.3UF for Siemens with pure and transparent sound.
- Excellent signal-to-noise ratio, low-noise precision stabilized power supply, equipped with fully sealed transformers and independent filtering power supply design at all levels, with the addition of high-temperature filtering electrolysis, it has been tested to achieve excellent dynamic response with ripple characteristics at the micro-volt level, providing an important foundation for good sound quality.
- Accurate reproduction of music details, using the classic 6-op amp amplifier circuit and a full range of wafer resistors, optimizing wiring for precise reproduction of music details.
- For ALPS potentiometer imported from Japan has stable consistency between the two channels, making it impossible to compare errors with ordinary instruments. It also has ultra-low sound distortion and high fidelity, making it the preferred choice for high-end audiophiles.
- Using high-end gold-plated interface resistors with low loss, low conductivity, and resistance to oxidation.
- Enjoy the fun of HiFi music with any combination, it is a front-end amplifier that needs to be paired with a back-end to drive the speaker. It can be used with different transistor back-end and electronic tube back-end.
Specification:
- Amplification: 6X
- THD: ≤0.003% (1kHz)
- Frequency response: 10Hz - 30kHz (±0.5dB)
- SNR: ≥110dB
- Input sensitivity: 255mV
- Input impedance: 50Kohms
- Input voltage: 220V (110V is optional)
- Product size: 333 x 245 x 61mm
- Net weight: 2.9kg
Package Included:
- 1 x Preamplifier
- 1 x Power Cable
- 1 x Remote Control
- 1 x User Manual
E200 Preamplifier HiFi Fully Balanced Amplifier without Bluetooth Support Treble/Bass Adjustment
Features:
- Multiple optimizations of mature circuit architecture.
- E200 is a preamplifier with treble, medium, and bass frequency modulation functions, which can achieve fine tuning and correction adjustment of various frequency bands, making it very practical.
- The E200 also has a direct pass function, which can switch to skip tone circuits and achieve only high fidelity amplification.
- The remote control function is within reach, and the front-end design has remote control function: it can achieve remote control volume control, input selection switching and mute function, making the operation within reach.
- The Bluetooth version receiving component uses the current high-level Bluetooth 5.1 version and the Qualcomm QCC5125 chip from the United States, which almost supports all current Bluetooth lossless transmission formats: SBC AAC APTX LDAC high-level, and is equipped with a separate Bluetooth decoding chip PCM5102 to provide strong guarantee for high-quality audio output.
- APTX-LL solving latency issues is crucial for achieving audio and video synchronization in gaming and multimedia applications. Allow you to listen to the consistent sound quality of streaming music from commonly used media services.
- The starting point of excellence is the high point, with the addition of high-end imported audio electrolytic capacitors and for Nichicon HiFi supplements high-frequency low resistance electrolytic capacitors. The coupling capacitors use four 3.3UF for Siemens with pure and transparent sound.
- Excellent signal-to-noise ratio, low-noise precision stabilized power supply, equipped with fully sealed transformers and independent filtering power supply design at all levels, with the addition of high-temperature filtering electrolysis, it has been tested to achieve excellent dynamic response with ripple characteristics at the micro-volt level, providing an important foundation for good sound quality.
- Accurate reproduction of music details, using the classic 6-op amp amplifier circuit and a full range of wafer resistors, optimizing wiring for precise reproduction of music details.
- For ALPS potentiometer imported from Japan has stable consistency between the two channels, making it impossible to compare errors with ordinary instruments. It also has ultra-low sound distortion and high fidelity, making it the preferred choice for high-end audiophiles.
- Using high-end gold-plated interface resistors with low loss, low conductivity, and resistance to oxidation.
- Enjoy the fun of HiFi music with any combination, it is a front-end amplifier that needs to be paired with a back-end to drive the speaker. It can be used with different transistor back-end and electronic tube back-end.
Specification:
- Amplification: 6X
- THD: ≤0.003% (1kHz)
- Frequency response: 10Hz - 30kHz (±0.5dB)
- SNR: ≥110dB
- Input sensitivity: 255mV
- Input impedance: 50Kohms
- Input voltage: 220V (110V is optional)
- Product size: 333 x 245 x 61mm
- Net weight: 2.9kg
Package Included:
- 1 x Preamplifier
- 1 x Power Cable
- 1 x Remote Control
- 1 x User Manual
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Dec 26, 2024 at 01:09:34 PST, seller added the following information:
On Aug 19, 2025 at 01:31:55 PDT, seller added the following information: