Description
Maxgeek R450 Diesel Generator AVR Genset Automatic Voltage Regulator for LeroySomer Generator
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
-Operating temperature: -30â~+65â
-Storage temperature: -5â~+ 85â
-Shocks on the base: 9g depending on the 3 axes
-Vibrations: less than 10Hz, 2mm half-peak amplitude 1 Hz to 100Hz; 100mm/s, above 100Hz: 8g
Note: The AVR is IPOO, it must be incorporated in an environment which ensures it IP20 protection.
Electrical Characteristics:
-Maximum power supply: 150V, 50/60Hz
-Rated overload current: 10A-10s
-Electronic protection: in the case of a short-circuit, the excitation current is reduced to a value less than 1A after 10s
-In the event of loss of voltage reference, the excitation current is reduced to a value less than 1A after 1s for AREP/SHUNT, 10s for PMG
-In the event of overexcitation, the current is reduced as indicated in the next diagram (see 3.2.1.4).
-Fuses: F1 on X1 and F2 on 2210A, 250V
-Voltage sensing
0-110V terminals=95 to 140V
0-220V terminals=170 to 260V
0-380V terminals=340 to 528 V
For other voltages, a transformer should be used
Voltage regulation: ±0.5%
Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. < 2.5VA Cl1, secondary 1A or 5A.
Quadrature Droop:
Quadrature droop adjustment via potentiometer P4 within a range:
From 0 to 8% with a PF=0.8 for 400V applications
From 0 to 14% with a PF=0.8 for 240V applications
From 0 to 8% for 110V applications with a step-up transformer (ratio of 4) placed on the voltage reference.
The potentiometer P4 has a non linear response. Then, when a secondary CT is connected the effective range starts from the the second 1/3 of P4 range and the case of a SA secondary CT the effective range starts from the first 1/3. When a 5ACT is used, the adjustment range is higher, so P4 must be set to the first 1/4 (anti-clockwise) and then progressively increase it.
Stability:
Stability adjustment via potentiometer P2. Selection of rotating switch according to the machine type and the response time as indicated in paragraph 3.2.3.
Excitation limitation:
Excitation limitation adjustment via potentiometer P3 as described below. The excitation current limitation threshold in steady state is set by a potentiometer at 110% of the rated value. The adjustment is made by the operator during the on-load test at rated power by tuning the potentiometer. When the excitation current exceeds this value a counter is activated at the speed of one record per second for 90s. When this time is elapsed, the current is reduced to the value of the rated excitation current. If in the meantime the excitation current drops below hold value. the counter counts at the same speed.
Package List:
1 x Generator AVR
The R450 AVR is supplied in a casing designed to be mounted on a panel with dampers.
-Operating temperature: -30â~+65â
-Storage temperature: -5â~+ 85â
-Shocks on the base: 9g depending on the 3 axes
-Vibrations: less than 10Hz, 2mm half-peak amplitude 1 Hz to 100Hz; 100mm/s, above 100Hz: 8g
Note: The AVR is IPOO, it must be incorporated in an environment which ensures it IP20 protection.
Electrical Characteristics:
-Maximum power supply: 150V, 50/60Hz
-Rated overload current: 10A-10s
-Electronic protection: in the case of a short-circuit, the excitation current is reduced to a value less than 1A after 10s
-In the event of loss of voltage reference, the excitation current is reduced to a value less than 1A after 1s for AREP/SHUNT, 10s for PMG
-In the event of overexcitation, the current is reduced as indicated in the next diagram (see 3.2.1.4).
-Fuses: F1 on X1 and F2 on 2210A, 250V
-Voltage sensing
0-110V terminals=95 to 140V
0-220V terminals=170 to 260V
0-380V terminals=340 to 528 V
For other voltages, a transformer should be used
Voltage regulation: ±0.5%
Current sensing: (parallel operation): input S1, S2 intended for 1 C.T. < 2.5VA Cl1, secondary 1A or 5A.
Quadrature Droop:
Quadrature droop adjustment via potentiometer P4 within a range:
From 0 to 8% with a PF=0.8 for 400V applications
From 0 to 14% with a PF=0.8 for 240V applications
From 0 to 8% for 110V applications with a step-up transformer (ratio of 4) placed on the voltage reference.
The potentiometer P4 has a non linear response. Then, when a secondary CT is connected the effective range starts from the the second 1/3 of P4 range and the case of a SA secondary CT the effective range starts from the first 1/3. When a 5ACT is used, the adjustment range is higher, so P4 must be set to the first 1/4 (anti-clockwise) and then progressively increase it.
Stability:
Stability adjustment via potentiometer P2. Selection of rotating switch according to the machine type and the response time as indicated in paragraph 3.2.3.
Excitation limitation:
Excitation limitation adjustment via potentiometer P3 as described below. The excitation current limitation threshold in steady state is set by a potentiometer at 110% of the rated value. The adjustment is made by the operator during the on-load test at rated power by tuning the potentiometer. When the excitation current exceeds this value a counter is activated at the speed of one record per second for 90s. When this time is elapsed, the current is reduced to the value of the rated excitation current. If in the meantime the excitation current drops below hold value. the counter counts at the same speed.
Package List:
1 x Generator AVR
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Jul 15, 2024 at 05:03:57 PDT, seller added the following information:
On Aug 19, 2025 at 00:33:30 PDT, seller added the following information: