This dimmer set works together with LED strip. It allows you to control the brightness, working mode (jump, fade, strobe), 60s Delay off, of LED strip.

Working Voltage: DC5V~24V

Input: 5.5mm DC Female

Output: 5.5mm DC Male

Max Output Current: 6A

Max Output Power: 5V: <30W,12V: <72W,24V: <144W,

Work temperature: -20~60°C

RF frequency: 433.92MHz

Remote distance: up to 20 meter

Remote battery :1pcs CR2025 cell(NOT include)

 

Instructions:

*Note: 14key DIM default pass code for product delivery:

1. If one-to-one codes are required, the controller is powered

off and powered on again. Press and hold the power on key,

and the light strip flashes white light to check the code

successfully.

2. If a pair of multi-pass code is required, the controller is

powered off and powered on again. Long press the power

off key, and the light strip flashes white light to clear the

code successfully.

Follow steps below to pair a new remote:

1.Disconnect receiver from power, reconnect within 5 sec.

2.Press "on"button for 2 seconds and the receiver will recognize

the new remote controller.