Purchasing Notice:
We will take every customer's order seriously, but due to logistics, warehouse or other unknown factors,If you have any questions or are not satisfied with the item or the logistics, please don‘t hesitate to contact us. Negative feedback or Neutral feedback will do nothing to solve the problem. As a professional seller, we are obliged to solve the problem for you for any reasonable range of requirements, and we will try our best to providing a satisfied solution . So if you have any questions, please contact us!
Description:
Data display panel that neatly displays speed, power, operating mode and more.
Easy to install and connect to your scooter, just plug it in.
PCB is a perfect replacement for the original dashboard of Xiaomi Pro electric scooter.
When replacing the new dashboard, please connect the dashboard to the throttle and e-brake first, if it is not connected, it may fail to connect the APP.
If the main controller is damaged, we recommend you to replace the controller and Bluetooth PCB at the same time, otherwise the main controller will damage the Bluetooth PCB again.
Specification:
Specification:
Type: Circuit Board
Color: Black
Suitable for: For Original Xiaomi M365 Electric Scooter Upgarded/For Xiaomi M365 Pro Repair
Material: Metal + Plastic
Packing Size: Approx. 11.5cm x 8cm x 3.7cm/4.53 x 3.15"" x 1.46""
Work Voltage: 36V
Needed APP: ""Mihome""
Installation Method:
1. Take off the stock display covers (both the top and the bottom units).
2. Remove the screw at the bottom of the panel, pull out the headlight wire, accelerator wire and brake hall wire in turn → pull off the water proof wire.
3. Inspect our display and make sure everything looks good after transit.
4.First install the connector. Make sure pins are aligned correctly (2nd
pin from the left on the board has to be untouched!). Insert the
connector and install the screw you have removed in step 2. Press blue
on button and make sure the screen lights up and works properly.
5. Remove adhesive tape which came with our unit. Put on
the new display panel and make sure its fully inserted in place. Watch
out for connector cables!
6. Insert button (remove adhesive strips again) and light extensions to your bottom panel cover.
7. Reapply the bottom panel cover you removed in step 1.
The Method of Operation:
1) Long press the"boot" button key to open it.
2) Press the "boot" button twice quickly to switch running mode
3) Press the "boot"button once to switch headlight.
4) When the "bluetooth display" button is shining,it means that your app is not yet connected to the scooter.
5) When the "bluetooth display" button is lighting,it means that your app is connected to the scooter.
Package Included:
1×Screen Cover
1×Circuit Board
2x Adhesive
Note:
When you replace the new dashboard, please connect the dashboard with the throttle and the electronic brake first. If there is no connection, then connecting to the APP may fail.
Before you order this Bluetooth circuit board, please confirm whether the fault of your main controller is causing the Bluetooth version to be damaged. Only the Bluetooth board is damaged, not the main controller is damaged, you can directly replace it.
If the main controller has been damaged, we advise that your controller and bluetooth circuit board must be replaced with the original one at the same time. Otherwise the main controller will cause the Bluetooth circuit board damage again.
Please tear off the plastic film on the surface of the product before use.
Before your upgrade,make sure your phone bluetooth is on.
Make sure your network is stable when upgrading.
The upgrade takes a long time ,please do not quit,patiently wait ,upgrade process,please ensure the network smoothly.
While you try "mihome" app upgrade many times but still not ok,try to change other app to upgrade or change another mobile phone to try.
When the "lock display" is lighting ,it means that your app is locked the scooter.
When the "tool display" is shinning,it means that one parts of your scooter have some problems.this time ,the speed display will show the number. You can according the number to analysis the problem and find out and solve them.
After you have installed the circuit board well, press the ‘boot’ button but can not open,please to check your controller ,controller connecting wire and the battery to find out the problems.the problem must on the three places.
After you have opened the "boot" button ,but can not switch to the mode\acceleration and headlight ,indicating that your controller needs to be upgraded.