Descriptions:
1. Remove the mounting plate, use a screwdriver to pry open the base.
2. Drilling and use the screws to mount the base on the wall as show in the nigure.
3. Cover the surface plate on the base.
4. Insert the back pegs of the dispenser into the holes on the wall cover.
5. Install the rendering.
6. Install the base on the bottom with anti theft lock and the key, soap dispenser bottle that can be locked and not pull out.
7. The cap is with a keyhole too, to prevent some rubbish into container.
8. Since you use the soap dispenser at the soap liquid, follow the following steps.
(1) Fill 100ml water into the container.
(2) Pull and hole the T-bar about 5 seconds, you should see some bubbles released into the water up.
(3) Repeat steps (2) four times slowly until all of the water inside the container through the pump was completed ruled out.
Put the remaining water in the container drained and then fill soap liquid.
YOUR SATISFACTION IS OUR HIGHEST PRIORITY. Please contact us if you have any questions or requests about our products or service. We are always glad to assist you and stand by our products.
We carry the most variety of new replacement batteries, chargers, headsets, earpieces, speaker microphones, and accessories for Two-Way Radio, Ham Radio, Portable Radio; and new replacement batteries and chargers for Power Tool, Cordless Drill, Grease Guns, and etc.
We continually strive to update and improve our product line. If there is anything that you are tying to find, or if you need help to find the right power tool replacement batteries, please feel free to contact us. ("Ask a question" located on the bottom of our eBay listing)
All brands, trademarks and registered trademarks are the property of their respective holders.