Emerson Custom formerly had their own spec’d line of “Emerson PRO CTS pots” but when 2020 rolled around and the supply chain blew up, it was finally time to take matters into their own hands. Emerson has designed and developed the new Premier Pro pots from the ground up.

Using a robust Fiberglass as the substrate, the solder lugs and resistive track are mounted to because its super strong, rigid, and won’t easily bend and snap like those in most every guitar. The taper used on these is a custom 20% Audio Taper that is a proprietary design from Emerson. This taper works equally as well in the volume position as it does in the tone position. The Solder lugs are a unique design… slightly oversized for plenty of room to run ground wires/buss wires and any other connection you need to the pot lugs.

Each Emerson Premier Pro pot includes a flat washer, lock washer, and hex mounting nut for custom height adjustment on a pickguard, control plate, or directly on to the guitars top from inside the control cavity.

Features

• Works great in single coil Tele's, P-Basses, J-Basses or other setups that need a 250k solid shaft pot
• Consistent feel from pot to pot
• Fiberglass substrate for added durability
• Tolerance: +/- 8% (230K -270K Ω)
• Audio taper (20% proprietary Emerson design) (20% output @ 1/2 rotation)
• Shaft Style: Solid Shaft (for use with US Spec 1/4" set screw style knobs)
  
• Shaft Diameter: 0.234” (5.94mm)
• Shaft Length: 3/8” (9.52mm)
• Thread: 3/8” X 32
• Thread Height: 3/8” (9.52mm)
• Required Mounting Hole: 3/8” (9.52mm)

Item Shown: Emerson Premier Pro EP-4406 250K Short Solid Shaft Pot
Model #: EP-4406
UPC: 746760481634