Vehicle Information Fitment:

Package Include:

1Piece Brake Calipers

Steps to replace a brake Caliper:

If you are comfortable with car repairs and have the necessary tools, you can replace the brake caliper yourself. The process might vary slightly for different makes and models. Here are the general steps to replace a brake caliper. 

1. Lift the vehicle

Use the lug wrench to loosen the lug nuts on the tire and then use the jack to lift the vehicle off the ground. Secure the vehicle with jack stands.

2. Remove the tire

Use the lug wrench to remove the lug nuts and then remove the tire from the vehicle.

3. Remove the caliper mounting bolts

Use the brake caliper tool to remove the caliper mounting bolts that hold the caliper in place.

4. Remove the caliper

Once the mounting bolts are removed, gently pry the caliper off the brake rotor. Be careful not to damage the brake hose as you remove the caliper.

5. Install the new caliper

Place the new caliper over the brake rotor and secure it in place with the caliper mounting bolts. Torque the bolts to the manufacturer’s recommended specifications using a torque wrench.

6. Install the tire

Replace the tire and lug nuts, torque to spec, and then lower the vehicle off the jack stands.

7. Bleed the brake system

Use a brake bleeding kit to remove any air from the brake system. This is an important step to ensure that the brakes are working properly. Continually top up the fluid in the reservoir as you bleed the brakes.

8. Test the brakes

Once the brake caliper is installed and the brake system has been bled, test the brakes to ensure they are functioning properly.