The Lazer Lamps Linear-24 Elite is a 682 mm slimline LED light bar that delivers serious performance from a low-profile housing just 40 mm tall. Using 24 high-efficiency 3 W LEDs and wide, vacuum-metallised optics, it produces up to 18,000 lumens of crisp, neutral white light with a 1 lux line at around 563 m and a 64° horizontal spread.

Fully ECE R112-approved for on-road high-beam use and featuring dual-output functionality (via an optional Linear E-mark Cap), the Linear-24 Elite is ideal for roof mounting, grille installs, light bars and bumpers on 4x4s, pick-ups, vans, trucks and performance road cars where space is limited but maximum visibility is still a priority.

Representing the very best in slimline auxiliary high-beam driving lights, the Linear-24 Elite combines a sleek, aerodynamic housing with premium electronics and optics to give a beam pattern that’s perfectly tuned for everyday road and fast-road use. Measuring 682 mm wide, 40 mm high and 62 mm deep, it’s a natural fit for modern vehicles where styling and airflow are just as important as performance.

At its heart are 24 high-output 3 W ‘premium bin’ LEDs running at a 5000 K colour temperature and 80 CRI, chosen to maximise sharpness and definition while remaining comfortable on the eyes over long night drives. Combined with Lazer’s ultra-reflective, vacuum-metallised optics, the lamp delivers a wide driving beam with strong down-the-road punch and excellent illumination into the verges and road shoulders.

Raw light output peaks at 18,000 lumens in full-output mode, with 1 lux reaching just under 600 m and a 0.25 lux line out beyond 1.1 km. Despite that performance, the comparatively low up/down spread of light makes the Linear-24 Elite especially well-suited to roof mounting, as it helps avoid glare off the bonnet while still throwing light far ahead and to the sides. The aero housing design also helps to virtually eliminate additional wind noise on roof installs.

A key feature of the Linear-24 Elite is its dual-output functionality. In markets where a lower UNECE E-mark reference is required, the lamp can be operated at a reduced output level using the separately available Linear E-mark Cap. This lowers both the reference value and power consumption, while still delivering a substantial upgrade over factory lighting.

Built to Lazer’s usual high standards, the lamp body is manufactured from aluminium with an anodised pre-treatment and automotive-grade powder top-coat for superior resistance to corrosion and chemicals. A CAE-optimised heatsink and advanced electronic thermal management ensure the LEDs operate within their ideal temperature window, preserving output and longevity even during sustained use at full power.

Protection against over-voltage and reverse polarity is built-in, while an ‘unbreakable’ hardcoated polycarbonate lens, IP67 sealing and full UNECE Reg 10 EMC approval mean the Linear-24 Elite is ready for tough real-world conditions on and off the road. Anti-theft side-mount brackets and pre-wired Superseal connectors are supplied as standard to make installation straightforward and secure.

Technical Specifications (per lamp):

General:
• Model: Linear-24 Elite
• Application: Slimline auxiliary high-beam LED light bar
• Voltage range (DC): 10–32 V
• LED life: 50,000 hours (approx.)
• Weight: 2,000 g (approx.)
• LED colour temperature: 5000 K (neutral white), ~80 CRI

Light Output & Optics:
• Total luminous flux (full output): 18,000 lm
• Effective driver ‘FOV’ flux: approx. 12,800 lm
• Number of high-output LEDs: 24 x 3 W LEDs
• Beam pattern: Wide driving beam
• Horizontal beam angle: 64° (approx.)
• Vertical beam angle: ~15° (approx., 2 % of peak)

Electrical Data:
• Power consumption (full output): 188 W
• Current draw @ 14.4 V (full output): 14.4 A (approx.)
• Power consumption (reduced E-mark mode with cap): ~38 W
• Current draw @ 14.4 V (reduced mode): ~2.6 A
• Connector: Pre-wired male & female 2-pin Superseal
• Electronic thermal management
• Over-voltage and reverse-polarity protection

Dimensions:
• Width: 682 mm
• Height: 40 mm
• Depth: 62 mm

Photometric Performance (typical):
• 0.25 lux line: 1,126 m
• 0.5 lux line: 796 m
• 1 lux line: 563 m
• 3 lux line: 325 m

Certification & Protection:
• High-beam approval: ECE Reg 112 (Class B driving light)
• E-mark reference: 2 × 30 (standard) / 2 × 17.5 (with Linear E-mark Cap – sold separately)
• EMC: ECE Reg 10 approved
• Ingress protection: IP67 – watertight and dustproof
• Housing: Aluminium with anodised pre-treatment + automotive-grade powder coat
• Lens: ‘Unbreakable’ polycarbonate with hardcoat lacquer
• Warranty: 5-year Lazer Lamps warranty
• Designed and manufactured in the UK

Notes:
• Linear E-mark Cap for reduced output / reference value is sold separately
• Vehicle-specific mounting kits and wiring looms are available separately for many applications

What’s in the Box:

• 1 × Lazer Lamps Linear-24 Elite LED light bar
• 1 × Anti-theft side-mount bracket kit (1127K) with fixings
• 1 × Pre-wired male and female 2-pin Superseal connector set
• Installation / wiring instructions

Key Features:

• High-performance 24-LED slimline light bar with 18,000 lm output
• Dual-output mode to allow a lower UNECE E-mark reference when required (via optional Linear E-mark Cap)
• 5000 K, 80 CRI LEDs maximise clarity, contrast and depth perception
• Wide 64° driving beam with strong distance and excellent verge illumination
• Low 40 mm profile and sleek housing for discreet, OE-style installations
• Aerodynamic design virtually eliminates wind noise on roof-mounted setups
• Combination of highly efficient 3 W ‘premium bin’ LEDs and vacuum-metallised optics for maximum efficiency
• Flexible mounting options with included anti-theft side brackets
• Electronic thermal management and CAE-optimised heatsink for consistent output and long LED life
• Anodised pre-treatment and automotive-grade powder coat for ultimate corrosion and chemical resistance
• ‘Unbreakable’ hardcoated polycarbonate lens and IP67 sealing for harsh on- and off-road environments
• Over-voltage and reverse-polarity protection built in
• ECE Reg 112 Class B high-beam and ECE Reg 10 EMC approved
• Designed, engineered and manufactured in the UK and covered by a 5-year warranty

YouTube

Instagram

Returns Policy

Delivery Information