Unpacking inspection: After receiving the product, the first unpacking inspection is carried out to confirm that the product packaging is complete and intact, and the accessories are complete (including the host, sensors, power cables, data cables, manuals, etc.).
Environment preparation: Select an appropriate working environment according to the requirements in the product manual, and ensure that the ambient temperature and humidity meet the product specifications.

Install sensors:
Fix the sensor on the work table or where it needs to be monitored according to the instructions in the manual.
Ensure that the sensor is securely installed and that there is good contact between the sensor and the measured object to ensure measurement accuracy.
Connecting cable:
Power on: Connect the power cable of the host to the power socket, and turn on the power switch to check whether the device starts properly.
Setup and configuration
Cleaning and maintenance: Regularly clean the surface of the equipment and sensor probes to avoid dust, oil and other pollutants affecting the measurement accuracy.
Calibration and correction: The sensor is calibrated regularly to ensure the accuracy of the measurement data.     If the measurement error is found to be large, it should be adjusted and corrected in time.