First, product preparation

Unpacking inspection: After receiving the product, the first unpacking inspection is carried out to confirm that the product packaging is complete and intact, and the accessories are complete (including the host, sensors, power cables, data cables, manuals, etc.).
Environment preparation: Select an appropriate working environment according to the requirements in the product manual, and ensure that the ambient temperature and humidity meet the product specifications.
Second, installation and connection

Install sensors:
Fix the sensor on the work table or where it needs to be monitored according to the instructions in the manual.
Ensure that the sensor is securely installed and that there is good contact between the sensor and the measured object to ensure measurement accuracy.
Connecting cable:
A dedicated data cable is used to connect the sensor to the host of the intelligent display control instrument. Ensure that cables are correctly connected to avoid device damage or measurement errors caused by incorrect connections.
If remote monitoring is required, connect corresponding communication cables or configure a wireless communication module.
Power on: Connect the power cable of the host to the power socket, and turn on the power switch to check whether the device starts properly.