This is a complete kit to operate 2 functions (4 solenoids) on your attachment.  The kit is a complete stand alone set up allow someone with no controls or not enough controls to add controls and operate their attachment. This kit does not depend on any current controls or wiring harnesses of the skid steer to operate the functions. 

NOTE: This kit does NOT add hydraulic capabilities, ONLY electronic control.

What is Included -

- 1 Power lead (batt) - This 6' harness can wired directly from your battery to provide a power connection for the Switch Assembly

- 1 Power Lead (Cig) - This 3' harness can be used to provide a power connection for the switch assembly if you have a cigarette outlet in your cab.

*You do not need both power leads, but the options allow you to use whichever option is more convenient to you.

- 1 Switch Assembly - This assembly includes 2 momentary switches to operate the 2 functions in each direction. The switches come pre-installed in a bracket with dual magnets allowing you to easily place the switch assembly in your cab in a convenient location.  The switch assembly has an integrated inline automotive fuse that protects both your skid steer, your attachment as well as your control kit harness.

- 1 Arm Harness - Included with the kit is an arm harness that can be permanently installed on your skid steer. This harness should be routed from the cab (switch assembly) along the hydraulic lines out to the location of your hydraulic QDs. Take care to note pinch points to protect your harness.  This harness will be long enough to fit MOST skid loaders on the market.  In the event that this harness is not long enough for your configuration, contact us through our warranty contact information included with your shipment and we will gladly customize a harness length to fit your needs.

- 1 Attachment harness - This harness is the harness that can be installed on your attachment and easily disconnected with out extensive removal of your kit. When you need to remove your attachment, this harness can detach from your arm harness saving you time on the job.