The 5-micron multi-layer filter paper: Effectively prevents impurities and contaminants in the fuel or fuel tank from entering the engine or clogging the fuel injectors, uniform fuel flow, and prevent stalls, poor starts and potential engine failures.
Superior Quality: Durable plastic, multi-layer filter paper and superior sealing components help long lasting and reliability.
Be careful when removing the lower filter housing the first time. Use both a box end wrench on the nut and a strap wrench on the body the first time. Then grease the O-ring and you will be ok after that.
The micron of this filter is 5.Every 20-22k miles,these need to be changed.
Package Includes: 1 Pack FD4615 Fuel filters.
Compatible with these models:
For F-250 Super Duty Pickup - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016
For F-350 Super Duty Chassis - V8 406 6.7L D.I. Diesel (VIN T) 2014-2016
For F-350 Super Duty Pickup - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016
For F-450 Super Duty Chassis - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016
For F-450 Super Duty Pickup - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016
For F-550 Super Duty Chassis - V8 406 6.7L D.I. Diesel (VIN T) 2011-2016
For F-650 Base Straight Truck - V8 406 6.7L D.I. Diesel (VIN T) 2016
For F-650 Base Tractor Truck - V8 406 6.7L D.I. Diesel (VIN T) 2016
For F-750 Base Straight Truck - V8 406 6.7L D.I. Diesel (VIN T) 2016
For F-750 Base Tractor Truck - V8 406 6.7L D.I. Diesel (VIN T) 2016
Changing frame rail filter:
Remove sensor harness, and lossen filter housing with a 1 1/4" socket or 32mm or use a strap wrench. I highly recommend a strap wrench so you don't shear the plastic housing. Turn 3 TIMES (before opening the drain valve as to not drench yourself in fuel) then losses yellow drain valve and drain into suitable container. Remember to lube new o-ring and re install everything.
Changing engine filter:
Remove the fuel line keepers on both lines and by pushing down the yellow tabs and the keeper will go down out of the way, the other fuel line will come off by squeezing both white tabs inward then remove. Loosen the 7mm nut use a 7mm socket wrench to loosen the clamp around the filter, twist to the right until it stops then pull upwards, and install following the same steps in reverse order.