• Description:
    • Brand: Unbranded
    • Type: Lambda Sensor
    • Part Number: 0281004028
    • Overall Length: 540 mm
    • Recommended Replace Interval: 250000 km
    • Number of circuits: 5
     
  • Cross References:
    • MAGNA STEYR: 779382503
    • NGK: 91299, UAR9000EE008
    • Omnicraft: 2376381
     
  • Compatible with the following OEM references:
    • BMW: 13627793825, 779382503
    • STEYR MOTORS: 7793825
     
  • Other References:
    • LS 44028
    • LSU-4.9
    *PLEASE NOTE THAT THE LIST OF VEHICLES ABOVE IS A GUIDE ONLY, PLEASE MATCH THE PART NUMBERS WITH THOSE ON YOUR CURRENTLY FITTED SENSOR. THANK YOU*
  •  
  • Kikosatabo

    For Bosch Lambda Oxygen O2 Sensor 0281004028 13627793825 779382503 Fast Delivery

    Description:

    • Brand: Unbranded
    • Type: Lambda Sensor
    • Part Number: 0281004028
    • Overall Length: 540 mm
    • Recommended Replace Interval: 250000 km
    • Number of circuits: 5

     

    Cross References:

    • MAGNA STEYR: 779382503
    • NGK: 91299, UAR9000EE008
    • Omnicraft: 2376381

     

    Compatible with the following OEM references:

    • BMW: 13627793825, 779382503
    • STEYR MOTORS: 7793825

     

    Other References:

    • LS 44028
    • LSU-4.9

    *PLEASE NOTE THAT THE LIST OF VEHICLES ABOVE IS A GUIDE ONLY, PLEASE MATCH THE PART NUMBERS WITH THOSE ON YOUR CURRENTLY FITTED SENSOR. THANK YOU*

     

    Package Included:

    • 1X Oxygen Lambda Sensor

     
    About Us:
    We are proud to offer quality service and we glad to see you in our eBay store. If you have any questions about our products, please do not hesitate to contact us. Thank you for your interest in our company, we hope that you will be satisfied with the service and quality of our products!

     

     

    Most Common Problems After Installing a New Oxygen Sensor
    1:Incorrect OE / part number
    The new oxygen sensor does not match the vehicle’s year, model, engine type or position (front/rear).
    2:Front/rear oxygen sensors mixed up
    Front and rear O2 sensors have different functions and signal characteristics; they are not interchangeable.
    3:Old trouble codes not cleared
    The ECU still stores previous fault codes, causing the check engine light to remain on even after replacement.
    4:Loose or damaged wiring / connector
    Poor contact, corrosion, water damage or broken wires lead to no signal or heating circuit failure.
    5:Leak in the exhaust system
    Exhaust leaks near the sensor cause false lean readings and trigger error codes.
    6:Sensor not properly tightened
    Gaps or air leakage around the mounting thread affect measurement accuracy.
    7:ECU not completed relearning / adaptation
    The engine control unit needs driving cycles to recognize the new sensor; temporary codes may appear before adaptation.
    8:Defective catalytic converter
    If the catalytic converter is faulty, the rear oxygen sensor is the most easily misjudged part.
    The rear O2 sensor is used to monitor the condition of the catalytic converter.
    If the catalytic converter is worn out or clogged, replacing the rear O2 sensor with a new one will still cause fault codes.

     


    Item Specifics
    Connector 6 Pins
    Brand Unbranded
    Type Lambda Sensor
    Function Lambda Sensor
    Manufacturer Part Number 0281004028
    Overall Length 540 mm
    Recommended Replace Interval 250000 km
    Number of circuits 5
    Reference OE/OEM 1 BMW: 13627793825, 779382503
    Reference OE/OEM 2 MAGNA STEYR: 779382503
    Reference OE/OEM 3 NGK: 91299, NGK: UAR9000EE008
    Reference OE/OEM 4 Omnicraft: 2376381, STEYR MOTORS: 7793825

    Contact Us

    If our product doesn't satisfy you cause by any reason, please feel free to contact us. We will reply you asap within 24 hour (Holiday not inclued). Please don't leave any Neutral/ Negative feedback or open any require and case. We promiss we will help you solve any problem. Thank you.

    Shipping

    Your order will be dispatched within 1-2 business days of receiving payment (Monday-Friday) and you will be expected to receive it between 2-3 business days after dispatch (Remote areas may increase 1-2 days).

    Returns

    If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one.
    You can return a product for up to 30 days from the date you purchased it.
    Please Note:
    Please write us a message before your return, otherwise we will not accept the package.
    Any product you return must be in the same condition you received it and in the original packaging.

    Payment

    We only accept paypal payment.

    Kikosatabo

    Shop Category
    Excellent Delivery
    For Bosch Lambda Oxygen O2 Sensor 0281004028 13627793825 779382503 Fast Delivery

    Description:

    • Brand: Unbranded
    • Type: Lambda Sensor
    • Part Number: 0281004028
    • Overall Length: 540 mm
    • Recommended Replace Interval: 250000 km
    • Number of circuits: 5

     

    Cross References:

    • MAGNA STEYR: 779382503
    • NGK: 91299, UAR9000EE008
    • Omnicraft: 2376381

     

    Compatible with the following OEM references:

    • BMW: 13627793825, 779382503
    • STEYR MOTORS: 7793825

     

    Other References:

    • LS 44028
    • LSU-4.9

    *PLEASE NOTE THAT THE LIST OF VEHICLES ABOVE IS A GUIDE ONLY, PLEASE MATCH THE PART NUMBERS WITH THOSE ON YOUR CURRENTLY FITTED SENSOR. THANK YOU*

     

    Package Included:

    • 1X Oxygen Lambda Sensor

     
    About Us:
    We are proud to offer quality service and we glad to see you in our eBay store. If you have any questions about our products, please do not hesitate to contact us. Thank you for your interest in our company, we hope that you will be satisfied with the service and quality of our products!

     

     

    Most Common Problems After Installing a New Oxygen Sensor
    1:Incorrect OE / part number
    The new oxygen sensor does not match the vehicle’s year, model, engine type or position (front/rear).
    2:Front/rear oxygen sensors mixed up
    Front and rear O2 sensors have different functions and signal characteristics; they are not interchangeable.
    3:Old trouble codes not cleared
    The ECU still stores previous fault codes, causing the check engine light to remain on even after replacement.
    4:Loose or damaged wiring / connector
    Poor contact, corrosion, water damage or broken wires lead to no signal or heating circuit failure.
    5:Leak in the exhaust system
    Exhaust leaks near the sensor cause false lean readings and trigger error codes.
    6:Sensor not properly tightened
    Gaps or air leakage around the mounting thread affect measurement accuracy.
    7:ECU not completed relearning / adaptation
    The engine control unit needs driving cycles to recognize the new sensor; temporary codes may appear before adaptation.
    8:Defective catalytic converter
    If the catalytic converter is faulty, the rear oxygen sensor is the most easily misjudged part.
    The rear O2 sensor is used to monitor the condition of the catalytic converter.
    If the catalytic converter is worn out or clogged, replacing the rear O2 sensor with a new one will still cause fault codes.

     


    Contact Us

    If our product doesn't satisfy you cause by any reason, please feel free to contact us. We will reply you asap within 24 hour (Holiday not inclued). Please don't leave any Neutral/ Negative feedback or open any require and case. We promiss we will help you solve any problem. Thank you.

    Shipping

    Your order will be dispatched within 1-2 business days of receiving payment (Monday-Friday) and you will be expected to receive it between 2-3 business days after dispatch (Remote areas may increase 1-2 days).

    Returns

    If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one.
    You can return a product for up to 30 days from the date you purchased it.
    Please Note:
    Please write us a message before your return, otherwise we will not accept the package.
    Any product you return must be in the same condition you received it and in the original packaging.

    Payment

    We only accept paypal payment.


    All rights reserved.