Specification
Condition: Brand New
Connector: 3Pins
Feature：
Built to strict quality control standards.
Ready to use, Direct Replacement.
100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
100% pure copper windings in bobbins improve durability ,thermoplastic housing withstands heat stress for enhanced durability
Silicone rubber boot withstands extreme heat to ensure superior insulation
Spark Plugs are using High-Performance Iridium metal, Much better than Nickel and Platinum
It's suggested that ignition coil and spark plug be replaced in a sychronized manner to lower the likelihood of common ignition system dysfunctions such as failure to start，engine vibration, misfiring, inadequate power, spark plug fouling and poor fuel economy
Package include:
6pcs Ignition Coils + 6pcs Iridium Spark Plugs
Interchange Part Number：
UF807, 68223569AD, 68223569AB, 68223569AC
Spark Plugs OE number：9673
Fitment：
For Chrysler
·2017-2018 Pacifica V6 3.6L
For Dodge
·2016-2018 Durango V6 3.6L
For Jeep
·2016-2018 Grand Cherokee V6 3.6L
·2018 Wrangler V6 3.6L
For Ram
·2019-2020 1500 V6 3.6L
Attention
How to Change Ignition Coils and Spark Plugs?
1.Disconnect the old ignition coil and spark plugs
2.Disconnect your battery’s negative terminal
3.Locate the ignition coil and spark plugs to be replaced.
4.Release the clip on the plug running into the side of coil.
5.Use a wrench to unscrew the bolts holding the original coil in place
6.Extract original ignition coil and spark plugs from the engine bay
7.Swapping in the new ignition coil and spark plugs
8.Prior to installation, compare the new coil to the old one
9.Orient the new coil in the same direction
10.Insert the bolts to hold the coil in place
11.Activate the New ignition coil and spark plugs
12.Connect the plug into the side coil
13.Plug in ignition cables according to the order written on them.
14.Reconnect the battery
15.Start the vehicle to test the new ignition coil and spark plugs
Note
In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement.
pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.
