π§ 12V 130A Alternator β Fits 2003-2009 Acura MDX/RL/TL & 2005-2008 Honda Odyssey/Pilot/Ridgeline 3.5L/3.7L β Replaces 31100-RDJ-A01, Lester 11099
Is your Acura MDX, RL, TL, or Honda Odyssey/Pilot/Ridgeline struggling with dimming headlights, a dead battery after short trips, or that annoying ALT warning glowing on the dash? A failing alternator is a common headache on high-mileage J-series V6 engines, and dealership replacements often run $800+ once labor is factored in. This 130A alternator is 100% factory tested, built to strict OE-matched specs, and delivers reliable power to keep your battery charged and all electronics (AC, headlights, infotainment) running smoothly β all at a fraction of dealer cost.
β Key Features & Benefits
100% Factory Tested β Every unit is validated for voltage regulation and output before shipping, so you donβt get a dud that leaves you stranded in a parking lot.
OE-Matched Performance β Engineered to match original Denso/Honda/Acura alternator specifications for perfect fit and consistent 12V/130A output. No bracket modifications or wiring tweaks needed β bolts right into your existing mounting points.
Built for Harsh Conditions β Key internal components are greased to resist noise, vibration, and corrosion from road salt and extreme under-hood temperatures, ensuring long-term reliability.
Long-Life Design β Premium brushes and heavy-duty bearings resist premature wear, eliminating the whining and grinding noises that plague cheap aftermarket units.
Quiet Operation β Internal regulator (IR) and internal fan (IF) keep noise and vibration to a minimum, preserving the refined cabin experience of your Acura or Honda.
βοΈ Specifications
Condition: 100% Brand New
Material: Aluminum
Finish: Silver
Placement: Front (Engine Bay)
Voltage: 12V
Rotation: CW (Clockwise)
Amperage: 130A
Pulley Grooves: 6
Regulator: IR (Internal)
Fan Type: IF (Internal)
π’ Part Numbers
Please confirm your original alternatorβs part number matches one below before ordering:
Acura OE: 31100-RDJ-A01, 31100-RGL-A01, CSC10, CSD29
Honda OE: 31100-RGL-A01, 31100-RGM-A01, 31100-RJA-A01, 31100-RJA-A02, 31100-RYP-A01, CSD29, CSD30, CSD69
Denso: 104210-3100, 104210-4290, 104210-4300, 104210-4301, 104210-4690
Lester: 11099, 11150, 11151
Arrowhead (OEM) Old: VND0339
Arrowhead (OEM): VND0339, AND0308, AND0340, AND0408
Arrowhead: 400-52252R
J & N: 400-52163, 400-52252R
Dixie Electric: A-80032, A-80312, A-80313, A-80337
Lucas Electrical Europe: LRA01621, LRA04171
NAPA Power Premium Plus: 213-9567
PIC: 290-5083, 290-5220, 290-5221, 290-5221A, 290-5222
Remy Light Duty: 12423, 12723, 12778
USA Industries: A2918, A3150
WAI (Old): 1-2975-01ND, 1-2976-01ND
WAI: 1-2970-01ND-3, 11151N, 11151R
Wilson: 90-29-5548, 90-29-5654, 90-29-5681
Wilson New: 90-29-5548, 90-29-5654, 90-29-5681
π Vehicle Fitment
β Fits the following vehicles with the specified engine:
Acura
2003β2006 MDX β 3.5L V6
2007β2009 MDX β 3.7L V6
2005β2008 RL β 3.5L V6
2004β2008 TL β 3.2L V6
2007β2008 TL β 3.5L V6
Honda
2005β2007 Odyssey β 3.5L V6
2005β2008 Pilot β 3.5L V6
2006β2008 Ridgeline β 3.5L V6
π‘ Fitment Tip
These models span multiple generations of the J-series V6. Always confirm your original part number matches the list above. Send us your 17-digit VIN at checkout and weβll verify fit before shipping.
π¦ Package Includes
1 Γ 12V 130A Alternator
β οΈ Installation & Troubleshooting (Professional Install Recommended)
Basic Install Steps:
Disconnect the negative battery terminal first to avoid electrical shorts.
Remove the intake hose, MAF sensor, and air filter box to access the alternator.
Loosen the serpentine belt tensioner and slip the belt off the alternator pulley.
Unplug all electrical connectors, remove mounting bolts, and pull the old unit out.
Clean oil, dust, or debris from the engineβs alternator mounting surface.
Slide the new alternator into place, hand-tighten bolts, then torque to spec.
Reconnect wiring, reinstall the belt (double-check itβs seated on all pulleys), and reassemble intake components.
Reconnect the battery, start the engine, and check voltage at idle β should read ~13.8β14.4V.
Diagnose Alternator Noise Before You Buy (Avoid Unnecessary Returns!):
Noise changes with engine speed? Check the serpentine belt first β worn, stretched, or misaligned belts are the #1 cause of alternator-area noise. Adjust or replace the belt before swapping parts.
Noise from front/back of the alternator? Likely dry or worn bearings, common on high-mileage units.
Noise from the middle with visible vibration? Internal stator/rotor friction β the old alternator is confirmed bad and needs replacement.
β Why Buy This Alternator
Direct Fit for 8 Popular Acura/Honda Models β No modifications needed when part number matches.
Matches 40+ OE & Aftermarket References β Including common Denso, Lester, and Honda/Acura part numbers for guaranteed fitment.
130A Output β Handles all factory accessories plus aftermarket upgrades without strain.
Far Cheaper Than Dealership Pricing β Skip the $800+ dealer quote and get back on the road for less.
VIN Verification Available β Send your VIN at checkout for pre-shipping fit confirmation.
π Add to cart today, and send your VIN for a guaranteed fit before we ship.








