• The Lazer Lamps Linear-6 Elite is a compact, slimline LED light bar that delivers twice the light output of the standard Linear-6 from the same 232 mm wide, 40 mm tall housing. Using 12 highly efficient 3 W LEDs and advanced vacuum-metallised optics, it produces an impressive 4,050 lumens of crisp 5000 K light with a 1 lux line at 282 m and a 0.25 lux line of 563 m.

    Fully ECE R112-approved as a Class B driving light (E-mark Ref. 17.5), the Linear-6 Elite is ideal for high-end installs on cars, 4x4s, pick-ups, vans and side-by-sides where space is tight or a discreet OE-style look is required, but serious extra high-beam performance is still essential.

  • Quite simply one of the most powerful low-profile light bars in its class, the Linear-6 Elite takes Lazer’s smallest slimline chassis and pairs it with the same premium 3 W LEDs used in their top-flight WRC lighting solutions. The result is a compact bar that massively outperforms its size, providing exceptional visibility on dark country roads, B-roads and off-road trails.

    Inside the sleek aluminium housing you’ll find 12 high-output 3 W LEDs tuned to a neutral 5000 K colour temperature and around 80 CRI. This combination gives a crisp, natural white light that enhances contrast, depth perception and detail without the harsh, blue tint that can increase eye fatigue on long night drives.

    The ultra-reflective, vacuum-metallised optics have been optimised to deliver a wide driving beam with reduced up/down spread, making the Linear-6 Elite particularly well suited to low mounting positions (such as grilles or number plate areas) and also to roof mounting where bonnet glare must be kept to a minimum. Despite its small size, 1 lux reaches 282 m, with very usable light right across the road and into the verges.

    Measuring just 40 mm tall and 232 mm wide, the Linear-6 Elite is perfect where there’s limited space or where you want a subtle install that only really reveals itself at night. The slim, aero design also means wind noise is virtually eliminated when mounted on roof bars or racks.

    As with all Lazer products, build quality is OE-grade. The aluminium housing receives an anodised pre-treatment followed by an automotive-grade powder top-coat for outstanding corrosion and chemical resistance. A CAE-optimised heatsink and advanced electronic thermal management continuously regulate LED temperature, safeguarding performance and longevity even under sustained use.

    The “unbreakable” hardcoated polycarbonate lens is bonded into the housing for guaranteed watertightness (IP68), while over-voltage and reverse-polarity protection ensure reliable operation on modern electrical systems. Fully approved to UNECE Reg 112 (Class B driving light) and Reg 10 (EMC), the Linear-6 Elite can be legally integrated with your high-beam circuit in many markets (subject to local regulations).

    Supplied with anti-theft side-mount brackets and pre-wired 2-pin Superseal connectors, installation is straightforward whether you’re fitting a single central lamp or pairing multiple units. Single- and twin-lamp wiring kits are available separately to complete the install.

  • Technical Specifications (per lamp – Linear-6 Elite):

    General:
    • Model: Linear-6 Elite
    • Product code: 0L06-EL-LNR
    • Application: Slimline auxiliary high-beam LED driving light
    • Operating voltage (DC): 10–32 V
    • LED life: 50,000 hours (approx.)
    • Weight: 495 g (approx.)
    • LED colour temperature: 5000 K (neutral white)
    • Colour rendering index (CRI): approx. 80
    • Number of high-output LEDs: 12 × 3 W

    High Beam Performance:
    • Total luminous flux (raw): 4,050 lm
    • Total driver “FOV” flux: 2,884 lm (effective lumens in +/-45° left/right, +/-10° up/down)
    • Beam pattern: Wide driving beam
    • Horizontal beam angle: 64° (to 2% of peak)
    • Power consumption: 42 W
    • Current draw @ 14.4 V: 2.9 A (approx.)

    Dimensions:
    • Width: 232 mm
    • Height: 40 mm
    • Depth: 62 mm

    Photometric Data:
    • 0.25 lux line: 563 m
    • 0.5 lux line: 398 m
    • 1 lux line: 282 m
    • 3 lux line: 163 m

    Certification & Protection:
    • High-beam approval: UNECE Reg 112 – Class B driving light
    • ECE reference: 17.5
    • EMC approval: UNECE Reg 10
    • Ingress protection: IP68 (watertight and dust-tight)
    • Housing: Aluminium with anodised pre-treatment and automotive-grade powder top-coat
    • Lens: “Unbreakable” hardcoated polycarbonate, bonded for water-tightness
    • Heatsink: CAE-optimised for improved thermal dynamics
    • Electronic thermal management
    • Over-voltage and reverse-polarity protection
    • Warranty: 5-year Lazer Lamps warranty
    • Designed, engineered and manufactured in the UK

    Connectivity & Installation:
    • Supplied connector: Pre-wired male/female 2-pin Superseal
    • Mounting: Anti-theft side mounting brackets included; centre-mount and stay-bar kits available separately
    • NOTE: Wiring kits / looms are sold separately (single- and two-lamp looms available).

  • What’s in the Box:

    • 1 × Lazer Lamps Linear-6 Elite LED light bar
    • 1 × Anti-theft side mounting bracket kit (1127K) with stainless steel fixings
    • 1 × Pre-wired male/female 2-pin Superseal connector set
    • 1 × Installation / wiring instruction sheet

    Note: Vehicle-specific wiring kits and additional mounting accessories are available separately.

    Key Features:

    • Slimline high-performance LED light bar with Elite-grade output
    • 12 × 3 W ‘premium bin’ LEDs delivering 4,050 lumens
    • 5000 K, high-CRI output for excellent clarity, contrast and reduced eye fatigue
    • Wide 64° driving beam with 1 lux at 282 m and 0.25 lux at 563 m
    • Reduced up/down light spread – ideal for low grille/bumper mounting or roof installs with minimal bonnet glare
    • Sleek 40 mm low-profile housing for discreet OE-style installations and minimal wind noise
    • Vacuum-metallised optics for maximum efficiency and perfectly tuned road beam pattern
    • Electronic thermal management and CAE-optimised heatsink for consistent performance and long LED life
    • Aluminium housing with anodised pre-treatment and automotive-grade powder coat for superior corrosion resistance
    • “Unbreakable” hardcoated polycarbonate lens; IP68 watertight and dust-tight construction
    • Over-voltage and reverse-polarity protection; full EMC approval
    • Fully ECE R112 Class B road-legal high beam (Ref. 17.5) where regulations allow
    • Designed, engineered and manufactured in the UK and backed by a 5-year warranty

  • About Us
    Returns Policy
    Delivery Information
We strongly recommend professional installation of all equipment purchased from us. We do not provide remote technical support, however on-site installation assistance is available at our warehouse and charged at our hourly labour rate.  For any pre-sales questions, please contact sales@audiofile-incar.co.uk.