• The Lazer Lamps Linear-6 is a compact, slimline LED light bar that delivers a serious lighting upgrade from a housing just 232 mm wide and 40 mm tall. Using six highly efficient 3 W LEDs and wide, vacuum-metallised optics, it produces 2,250 lumens of crisp 5000 K light with a 1 lux line at around 247 m and a 0.25 lux line approaching 500 m – a big step up over standard headlights.

    Fully ECE R112-approved as a Class B driving light (E-mark Ref. 12.5), the Linear-6 is ideal where space is tight or a discreet OE-style install is preferred: front grille, lower bumper, number-plate mount, ATV/UTV front bars, roof racks and more.

  • Where an economical auxiliary lighting solution is required, but you still want a noticeable improvement over factory high beam, the Linear-6 fits the brief perfectly. It sits at the entry point of the Linear range, yet still benefits from the same UK-made build quality, electronics, optics and 5-year warranty as the larger models.

    Inside the 40 mm low-profile housing are six premium-bin 3 W LEDs tuned to a neutral 5000 K colour temperature. This gives a clean white output that improves clarity and contrast at night without the harshness associated with “blue” light. Lazer’s ultra-reflective, vacuum-metallised optics spread this light into a wide driving beam that illuminates the road ahead and into the verges and kerbs.

    Despite drawing only 21 W (around 1.5 A at 14.4 V), the Linear-6 delivers 2,250 lumens, with 1 lux at roughly 247 m and 0.25 lux out to about 494 m. The relatively low vertical beam spread makes it especially suitable for lower mounting positions such as the grille or number-plate area, helping to minimise bonnet glare while still projecting light far down the road.

    The sleek, aerodynamic body keeps wind noise to a minimum, which also makes the lamp well suited to roof bar or rack mounting on 4x4s, pickups and vans. At just 232 mm wide, it is also a great option for ATVs, UTVs, side-by-sides, small vans or where you’re working with narrow grille openings or limited mounting space.

    As with all Lazer products, the Linear-6 is engineered to last. The aluminium housing features an anodised pre-treatment and automotive-grade powder coat for corrosion resistance, while the hardcoated polycarbonate lens is bonded into place for guaranteed water-tightness. Electronic thermal management and a CAE-optimised heat sink ensure the LEDs run within their ideal temperature range for consistent performance and long life.

    The lamp is fully ECE R112 and ECE R10 approved, meaning it is road-legal as a high-beam driving light in many markets when installed and wired correctly. It comes supplied with low-profile side-mount brackets and pre-wired Superseal connectors for a straightforward, tidy installation. Higher-output Linear-6 Elite and versatile Linear-6 Elite+ versions are available separately if you need more power or extra functionality, but this listing is for the standard Linear-6 model.

  • Technical Specifications (per lamp – Linear-6 Standard):

    General:
    • Model: Linear-6 (Standard, black housing)
    • Application: Slimline auxiliary high-beam LED driving light
    • Operating voltage: 10–32 V DC
    • LED life: 50,000 hours (approx.)
    • Weight: 495 g (approx.)
    • LED colour temperature: 5000 K (neutral white)
    • Number of high-output LEDs: 6 × 3 W

    Light Output & Optics:
    • Raw luminous flux: 2,250 lm
    • Beam pattern: Wide driving beam
    • Horizontal beam angle: approx. 56° (to 10% of peak)
    • Vertical beam profile: Reduced up/down spread – ideal for low mounting positions

    Electrical Data:
    • Power consumption: 21 W
    • Current draw @ 14.4 V: 1.5 A (approx.)
    • Electronic thermal management
    • Over-voltage and reverse-polarity protection
    • Connector: Supplied with pre-wired 2-pin Superseal connectors (male & female)

    Dimensions:
    • Width: 232 mm
    • Height: 40 mm
    • Depth: 62 mm

    Photometric Performance (typical):
    • 0.25 lux line: 494 m
    • 0.5 lux line: 349 m
    • 1 lux line: 247 m
    • 3 lux line: 143 m

    Certification & Protection:
    • High-beam approval: ECE Reg 112 (Class B driving light)
    • E-mark reference: 12.5
    • EMC approval: ECE Reg 10
    • Ingress protection: IP67 – dust-tight and waterproof
    • Housing: Aluminium with anodised pre-treatment and automotive-grade powder coat
    • Lens: “Unbreakable” hardcoated polycarbonate, bonded for water-tightness
    • Warranty: 5-year Lazer Lamps warranty
    • Designed, engineered and manufactured in the UK

    Notes:
    • This listing is for the standard Linear-6 lamp. Elite and Elite+ variants with increased output and additional modes are available separately.
    • Vehicle-specific wiring kits and mounting solutions (including grille and number-plate mounts) are available separately.
    • Note: Wiring kit / loom sold separately.

  • What’s in the Box:

    • 1 × Lazer Lamps Linear-6 LED light bar (Standard)
    • 1 × Low-profile anti-theft side-mount bracket kit (1127K) with stainless steel fixings

    Note: Vehicle-specific wiring kit / loom is not included and is sold separately.

    Key Features:

    • Slimline 6-LED light bar with 2,250 lm output from a compact 232 mm housing
    • Only 40 mm tall – ideal where space is limited or a discreet installation is desired
    • Wide driving beam with strong down-road reach and excellent verge illumination
    • 5000 K neutral white output for improved clarity and reduced eye fatigue
    • Fully ECE R112 Class B approved (Ref. 12.5) for road-legal high-beam use where regulations allow
    • Sleek, aero housing helps minimise wind noise on roof or rack mounts
    • Highly efficient 3 W LEDs and vacuum-metallised optics maximise performance and efficiency
    • Reduced vertical spread optimised for low mounting positions – less bonnet glare
    • “Unbreakable” hardcoated polycarbonate lens and IP67 sealing for harsh on- and off-road environments
    • Advanced electronic thermal management and CAE-optimised heat sink for consistent output and long LED life
    • Over-voltage and reverse-polarity protection built in
    • Designed, engineered and manufactured in the UK and backed by a 5-year warranty

  • About Us
    Returns Policy
    Delivery Information