Description
9237 Original 24Bit Bridge Analog Input Module 779521-01 Open Box for National Instruments NI
Features:
* 4-channel, ± 25 mV, 24-bit synchronous bridge module
* 24-bit resolution with ± 25 mV analog input with RJ50 connector
* 4 simultaneous sampling analog inputs; Maximum sampling rate up to 50kS/s
* Full programming of half-bridge and full-bridge; Internal excitation up to 10 V
* Smart Sensor Compatible (TEDS)
* 1,000 VRMS transient isolation
* Operating temperature range: -40°C to 70°C
Description:
The 9237 Synchronous Bridge Module (in combination with CompactDAQ and CompactRIO for NI) includes all the signal conditioning functions required to simultaneously drive and measure four bridge-based sensors. Four RJ-50 plugs allow direct connection to most torque transducers or load cells, enabling custom cable solutions with minimal tools. With its high sampling rate and bandwidth, the 9237 results in a high-quality high-speed stress or load measurement system with no channel-to-channel phase delay. With 60 VDC isolation and 1,000Vrms transient isolation, the 9237 has high common-mode denoising to increase operator and equipment safety.
Specifications:
General:
* Analog input
* Analog output
* Digital I / O
* Counters / Timers
Physical Specifications:
* Product Family: Industrial I / O
* Measurement type: Strain / Bridge-based sensor
* Form Factor: CompactDAQ; CompactRIO
* Operating System / Target: Real-time system for Windows
* RoHS compliant: Yes
* Isolation Type: Channel docking ground isolation
* Single endpoint channel: 0
* Differential channels: 4
* Analog input resolution: 24 bits
* Maximum voltage range: Range: -25 mV / V - 25 mV / V. Accuracy: 0.0375 mV / V
* Bridge configuration: full bridge; semi-bridging; Quarter bridging
* Simultaneous sampling: Yes
* Excitation voltage: 2V, 2.5V, 3.3V, 5V and 10V
* Signal conditioning: anti-aliasing filters; voltage excitation; The bridge is complete
* Number of channels: 0
* Bidirectional channel: 0
* Input-only channel: 0
* Output-only channels: 0
* Counters: 0
* Length: 9cm/3.5"
* Width: 2.3cm/0.9"
* I / O Connector: RJ50
* Operating Temperature: -40°C to 70°C
Package Included:
* 1 x Bridge AI Module
Note:
* It is used, 100% tested, fully functional and in good condition. Please feel free to buy.
Features:
* 4-channel, ± 25 mV, 24-bit synchronous bridge module
* 24-bit resolution with ± 25 mV analog input with RJ50 connector
* 4 simultaneous sampling analog inputs; Maximum sampling rate up to 50kS/s
* Full programming of half-bridge and full-bridge; Internal excitation up to 10 V
* Smart Sensor Compatible (TEDS)
* 1,000 VRMS transient isolation
* Operating temperature range: -40°C to 70°C
Description:
The 9237 Synchronous Bridge Module (in combination with CompactDAQ and CompactRIO for NI) includes all the signal conditioning functions required to simultaneously drive and measure four bridge-based sensors. Four RJ-50 plugs allow direct connection to most torque transducers or load cells, enabling custom cable solutions with minimal tools. With its high sampling rate and bandwidth, the 9237 results in a high-quality high-speed stress or load measurement system with no channel-to-channel phase delay. With 60 VDC isolation and 1,000Vrms transient isolation, the 9237 has high common-mode denoising to increase operator and equipment safety.
Specifications:
General:
* Analog input
* Analog output
* Digital I / O
* Counters / Timers
Physical Specifications:
* Product Family: Industrial I / O
* Measurement type: Strain / Bridge-based sensor
* Form Factor: CompactDAQ; CompactRIO
* Operating System / Target: Real-time system for Windows
* RoHS compliant: Yes
* Isolation Type: Channel docking ground isolation
* Single endpoint channel: 0
* Differential channels: 4
* Analog input resolution: 24 bits
* Maximum voltage range: Range: -25 mV / V - 25 mV / V. Accuracy: 0.0375 mV / V
* Bridge configuration: full bridge; semi-bridging; Quarter bridging
* Simultaneous sampling: Yes
* Excitation voltage: 2V, 2.5V, 3.3V, 5V and 10V
* Signal conditioning: anti-aliasing filters; voltage excitation; The bridge is complete
* Number of channels: 0
* Bidirectional channel: 0
* Input-only channel: 0
* Output-only channels: 0
* Counters: 0
* Length: 9cm/3.5"
* Width: 2.3cm/0.9"
* I / O Connector: RJ50
* Operating Temperature: -40°C to 70°C
Package Included:
* 1 x Bridge AI Module
Note:
* It is used, 100% tested, fully functional and in good condition. Please feel free to buy.
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
