Features:
Product operation mode: turn on the power for a period of time, disconnect for a period of time, infinite loop (with normally open normally closed contacts)
1: size: 65mm*36mm*18mm
2: output: DC DC 5~30V AC 220V10A
3: quiescent current: 20mA working current: 50mA
4: working voltage: DC12V (10V to 16V fluctuations will not be affected)
5: service life: more than 100 thousand working temperature: -40~85'C
6: output using optocoupler isolation, enhance the ability to resist interference power consumption, to ensure the stability of the industrial level circuit board, class PLC, set the parameters can be forever memory after power off.
Set the time method is also very simple:
When the power is turned on, the countdown time is up.
K1 is divided into six cycles, the first three is set to connect the time, the latter three is set to disconnect the time. Click on the K1 100 digital tube began flashing, press K2, 100 digital change; click the K1 ten digital tube began to flicker, then press K2, ten bit digital change; click the K1 digital tube began to flicker, then press the K2 digits to change; and so on, not in the digital tube this press K2, flashing so far; the decimal point shift, decimal points in a 0 to 999 minutes in the ten bits 0 to 99.9 seconds without decimal points 0 to 999 seconds; after selection, this time set. Long press K2 can turn on or turn off the digital tube to reduce power consumption.
Package Included:
1 x controlled switch
Product operation mode: turn on the power for a period of time, disconnect for a period of time, infinite loop (with normally open normally closed contacts)
1: size: 65mm*36mm*18mm
2: output: DC DC 5~30V AC 220V10A
3: quiescent current: 20mA working current: 50mA
4: working voltage: DC12V (10V to 16V fluctuations will not be affected)
5: service life: more than 100 thousand working temperature: -40~85'C
6: output using optocoupler isolation, enhance the ability to resist interference power consumption, to ensure the stability of the industrial level circuit board, class PLC, set the parameters can be forever memory after power off.
Set the time method is also very simple:
When the power is turned on, the countdown time is up.
K1 is divided into six cycles, the first three is set to connect the time, the latter three is set to disconnect the time. Click on the K1 100 digital tube began flashing, press K2, 100 digital change; click the K1 ten digital tube began to flicker, then press K2, ten bit digital change; click the K1 digital tube began to flicker, then press the K2 digits to change; and so on, not in the digital tube this press K2, flashing so far; the decimal point shift, decimal points in a 0 to 999 minutes in the ten bits 0 to 99.9 seconds without decimal points 0 to 999 seconds; after selection, this time set. Long press K2 can turn on or turn off the digital tube to reduce power consumption.
Package Included:
1 x controlled switch
