This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A.
Electrical performance:
Model: IBT-2
Input voltage: 6V-27V
Maximum current: 43A
Input level: 3.3-5V
Control method: PWM or level
Duty cycle: 0-100%
Input port:
1.RPWM: forward level or PWM signal input, active high
2.LPWM: Reverse level or PWM signal input, active high
3.R_EN: forward drive enable input, high-level enable, low level off
4.L_EN: Reverse drive enable input, high-level enable, low level off
5.R_IS: forward drive current alarm output
6.L_IS: Reverse drive current alarm output
7.VCC: +5 V power output, 5V power supply connection with the microcontroller
8.GND: signal common low end
Instructions
method 1 :
VCC is connected to the 5V power supply of the microcontroller, and GND is connected to the GND of the microcontroller.
R_EN and L_EN are short-circuited and connected to 5V level, the driver can work.
L_ PWM, input PWM signal or high level motor rotates forward.
R_ _PWM, input PWM signal or high level motor reverse.
Method 2 :
VCC is connected to the 5V power supply of the microcontroller, and GND is connected to the GND of the microcontroller.
R_ EN and L_ EN are short-circuited and connected to the input PWM signal for speed regulation.
L_ PWM, the pin input 5V level, the motor rotates forward.
R_ _PWM, pin input 5V level motor reverse.
package
1pc BTS7960 43A High Power Motor Driver Module/ Smart Car Driver Module
