XTOOL X100 PADS with EEPROM Adapter Perform Full IMMO Function and Key programming:
- Read Immobilizer Information: Obtain basic data of the IMMO system, such as system version, configuration, registration information, etc., which is helpful for diagnosis and programming.
- Check Registered Keys: View the list of currently registered K!eys in the IMMO system to ensure the validity of the K!eys and help manage K!eys.
- Extract Immobilizer Data: Extract data from the anti-theft system for analysis, backup or modification.
- Read/Write Immobilizer:Update or adjust data in the IMMO system, such as modifying configuration or programming settings.
- Read/Calculate PIN Codes: Extract or generate PIN codes for Key programming and system access.
- Add Key Programming: Register the new K!ey or rotor into the anti-theft system so that it can start the vehicle normally.
- All-Keys-Lost Programming: Solve the situation of all K!eys lost and reprogram to make new K!eys.
- Generate Dealer K!ey: Create a dealer K!ey for testing or special case use.
- Vehicle Emergency Start: Bypassing the limitations of the IMMO system, allowing the vehicle to start in an emergency.
- IMMO Module Replacement: Replace or reprogram IMMO module to solve module failure or upgrade.
- Immobilizer Light Reset: Clear the fault warning light of the IMMO system, usually after repairing or resetting the system.
32+Hot Use Special Functions
Oil Reset Service: Performs Reset the Engine Oil Life System, which calculates the optimum oil life change interval based on the vehicle's driving conditions and climate.
Electronic Parking Brake (EPB) Service : Perform reset the electronic parking brake system and brake pads, which also supports the brake pad replacement (retraction, release of the brake pump), G-sensor and body angle calibration
BMS Reset：Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle
TPMS Reset：Allows you to quickly look up the tire sensor IDs from the vehicle ECU, as well as to perform TPMS replacement and reset procedures after tire sensors are replaced.
ABS Bleeding: Perform various bi-directional tests to check the operating conditions of ABS.
Injector Coding：This function can write the identification code of the fuel injector into the ECU so that the ECU can recognize and work normally.
Suspension：This function can adjust the height of the vehicle body
Seats Calibration：This function is suitable for the matching of replacement andmaintenance seats with memory function.
Headlamp：This function is used to initialize the adaptive headlight system.
Also Include SAS Reset, D^PF Regeneration, Throttle Relearn, Gearbox Match, Air Suspension, Window Initialization, Seats Calibration, Transporte Mode, Tire Upgrade, Mileage Correct, Gear Learning, Power Balance, Electronic Pump Activation,etc.
⭕NOTE:Maintenance Services not fit on All vehicle models,plz contact us via ebay message to check compatibilities first.
