DIY alloy wheel repair kit is designed to permanently repair curb damages,
scratches, slight dents, installation damages, sanding marks and other damages to alloy
wheels, synthetic wheels, steel rims and hubcaps, and many more on similar surface material.
Kit includes everything you need to fix scuffs and scratches in 30 minutes.
Application
This repair kit is good for repairing repair curb damages, scratches,
slight dents, installation damages, sanding marks and other damages
to alloy wheels, synthetic wheels, steel rims and hubcaps, and many more on similar surface material.
Product Attribute
Color:silver
Lifespan:3 months
Advantage & Features
Permanent
Easy to repair
Heat resistant to 130 degree
Added value - Vibration, Carwash resistant
How to use it
1. Preparation: clean the damaged alloy wheel and remove rough edges and
unevennesses around the damaged area.
2. Identify the repair area. If damage is slightly, use wet sandpaper to accommodate
the outlines to repaired surface, and Lacquer repair area.
3. If repair area big or with some holes. Then mixing the repair adhesive:
press out the needed mass of repair adhesive to a mat. Mix both components
to a consistent grey mass with spatula provided.(2-4min)
4. Repair: fill the mixed mass to overflow the damaged area. Allow dry for 15min.5. Accommodation the outlines: use wet sandpaper to accommodate the
outlines to repaired surface. If necessary, please repeat step 3 again.
6. Lacquering: clean the repair area and apply a thin layer of lacquer by brush.
Lacquer should dry at least 1-2 hours before using the car and full cure time is 3 days.
Precautions
Flammable & Harmful
Keep out of reach of children
Avoid breathing vapors. Use only in well-ventilated area. Skin and eye irritant! Wash skin thoroughly with soap and water immediately.
In case of eye contact, flush with water for 15 minutes. If irritation, consult a doctor.
Kit Contains
1 x Repair adhesive
1 x Alloy silver(vibration-resistant)
2 x Gloves
2 x Alcohol prep pads
2 x Plastic spatula
