New HP A3000-8G-PPOE+ Wireless Switch WX3000 Series 8x Ports
10/100/1000 JD444A
Model No: A3000-8G-PPOE+
P/N: JD444A

Brand New
In Original Box But Is Open
Included:
  • 1 x New HP A3000-8G-PPOE+ Wireless Switch WX3000 Series 8x Ports 10/100/1000 JD444A
  • 1 x Rackmount Ears Set
  • 1 x Power Cable
  • 1 x Console Cable
Overview
The HP WX3000G Wireless Switch Series comprises wired and wireless unified switches that integrate both a wireless controller and 1000 Mbps Ethernet switch functions. The WX3000G series switches provide 1000 Mbps Ethernet ports, each supporting a maximum power of 25 W, PoE+ (draft), and IEEE 802.11a/b/g/n APs, while delivering unified wired and wireless access control functions. The 3000G-24G-PoE+ wireless switch provides two 10-GbE slots on the rear panel. This relieves the transmission bottleneck at the core of a WLAN network. The WX3000G series switches are suitable for small- and medium-sized enterprise networks, as well as branches of large enterprise networks that require both wired and wireless access services.

HP 3000-8G-PoE+ Wireless Switch (JD444A)
  • Ports: 8 RJ-45 auto-negotiating 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASETX,IEEE 802.3ab Type 1000BASE-T); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
  • 1 RJ-45 serial console port
Performance
Built-in 802.1X and portal authentication servers: 
  • The WX3000G series provides a built-in IEEE 802.1X authentication server that supports multiple IEEE 802.1X authentication modes, such as TLS, PEAP, and MD5; the series also provides a built-in portal server that can authenticate users having no security authentication client installed; both features are economical and easy-to-use solutions for small- to medium-sized enterprise networks

Flexible forwarding modes: 
  • The WX3000G series supports both distributed forwarding mode and centralized forwarding mode, allowing you to set SSID-based forwarding types as needed; in a wireless network with centralized forwarding mode, all wireless traffic is sent to an AC for processing; if there is a wireless network in which APs are deployed at branches, ACs are deployed at the headquarters, and APs and ACs are connected over a WAN, the distributed mode will be necessary

Fast roaming
  • Supports Layer 3 roaming and fast roaming, satisfying the most demanding voice service requirements

High performance
  • Robust switching capacity and wire-speed processing provide powerful forwarding capacity for medium and large enterprise-size wireless LANs (WLANs)

Manageability
  • Web interface: allows configuration of the switch from any Web browser on the network

Layer 2 switching
  • VLAN support and tagging: support IEEE 802.1Q, with 4094 simultaneous VLAN IDs
  • GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
  • Spanning Tree: fully supports standard IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol for
  • faster convergence, and IEEE 802.1s Multiple Spanning Tree Protocol
  • Port mirroring: duplicates port traffic (ingress and egress) to a local or remote monitoring port
  • Jumbo packet support: supports up to 4 KB frame size to improve performance of large data transfers

Layer 3 routing
  • Layer 3 IP routing (3000G wired features): static IP routing provides basic routing; RIP provides RIPv1 and RIPv2 routingfunctions

Physical characteristics
  • Dimensions: 10.59(d) x 11.81(w) x 1.72(h) in. (26.9 x 30 x 4.36 cm) (1U height)
  • Weight: 6.39 lb. (2.9 kg)

Memory and processor 
  • Processor: Dual core @ 750 MHz, 64 MB flash, 512 MB DDR2 SDRAM
Mounting 
  • EIA standard 19-in. telco rack or equipment cabinet (hardware included)
Performance 
  • Switch fabric speed 1 Gbps
  • MAC address table size 2000 entries

Environment 
  • Operating temperature 32ºF to 113ºF (0ºC to 45ºC)
  • Operating relative humidity: 5% to 95%, noncondensing
  • Nonoperating/Storage temperature: -40ºF to 158ºF (-40ºC to 70ºC)
  • Nonoperating/Storage relative humidity: 5% to 95%, noncondensing

Electrical characteristics 
  • Maximum heat dissipation: 130 BTU/hr (137.15 kJ/hr)
  • Voltage: 100-240 VAC
  • Power Inputs: 40 W (without external PoE device); 140 W (with PoE)
  • Frequency: 50 / 60 Hz

Notes 
PoE power supply is available on the first 4 ports on the front panel (IEEE802.3af). Supports PoE+ power supply on the first 4 ports on the front panel, with each port providing up to 25 W. The internal power supply can offer up to 125 W in total.

Safety 
UL 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; GOST; C-Tick; NOM; IEC 60950-
1 (with CB report)

Emissions
EN 55022; VCCI; ICES-003; AS/NZS CISPR 22; EN 300 386; FCC Part 15; EN 61000-3-2:2006; EN61000-3-3:1995 +A1:2001+A2:2005; EMC Directive 2004/108/EC

Immunity EN 
EN 61000-4-2:1995+A1:1998+A2:2001; EN 61000-4-3:2006; EN61000-4-4:2004; EN 61000-4-5:2006; EN 61000-4-6: 1996+A1:2001:A2:2007; EN 61000-4-8:2001; EN 61000-4-11:2004; EN55024:1998+ A1:2001 + A2:2003

Management IMC
Intelligent Management Center; command-line interface; Web browser; configuration menu; SNMP Manager; Telnet; HTTPS; RMON1; FTP; IEEE 802.3 Ethernet MIB; Ethernet Interface MIB

Features 
The 3000-8G-PoE+ wireless switch supports 8 APs by default; no license is needed.
VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED
£150 excluding VAT

VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK
TH 187769 - CN09BJ1V11
TH 187770 - CN00BJ1Y6D
TH 187771 - CN09BJ1V1H
AJ 276049 - 1