 |
|
 |
| SYS-5028D-TN4T |
- SuperServer 5028D-TN4T
(Black)
|
| |
|
| CPU |
- Intel® Xeon® processor D-1541
- FCBGA 1667 supported
- CPU TDP support 45W
- System-on-Chip
|
| |
|
| Memory Capacity |
- 4x DDR4 DIMM sockets
- Supports up to 128GB DDR4 ECC RDIMM
- Supports up to 64GB DDR4 ECC/non-ECC UDIMM
|
| Memory Type |
- 2400/2133/1600/1333MHz ECC DDR4 SDRAM
|
| DIMM Sizes |
|
| Memory Voltage |
|
| Error Detection |
- Corrects single-bit errors
- Detects double-bit errors
(using ECC memory)
|
| |
|
| SATA |
- SoC controller for SATA3 (6Gbps) ports
|
| Network Controllers |
- Dual LAN via Intel® i350-AM2 Gigabit Ethernet
- Dual LAN via SoC 10GBase-T
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBASE-T, 100BASE-T, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
|
| IPMI |
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
|
| Graphics |
- BMC integrated ASPEED AST2400
|
| |
|
| SATA |
|
| LAN |
- 2x RJ45 Gigabit Ethernet LAN ports
- 2x RJ45 10GBase-T ports
- 1x RJ45 Dedicated IPMI LAN port
|
| USB |
- 2x USB 3.0 ports (rear)
- 2x USB 2.0 ports (front panel)
|
| Serial Port |
|
| DOM |
- 1x SATA DOM (Disk on Module) power connector
|
| VGA |
|
| Others |
|
| |
|
| Software |
- Intel® Node Manager
- IPMI (Intelligent Platform Management Interface) 2.0 with KVM support
- SuperDoctor® 5
- Watch Dog
- NMI
- SUM
|
|
|
|
|
|
| Form Factor |
|
| Model |
|
| |
|
|
| Height |
|
| Width |
|
| Depth |
|
| Weight |
- Gross Weight: 15 lbs (6.8 kg)
|
| Available Colors |
|
| |
|
|
| Buttons |
- Power On/Off button
- System Reset button
|
| LEDs |
- Power LED
- Hard drive activity LED
- Network activity LEDs
- System Overheat LED
|
| |
|
| PCI-E |
- 1x PCI-E 3.0 x16 (Low Profile) slot
- 1x M.2 PCI-E 3.0 x4, M Key 2242/2280
|
| |
|
|
| HDD |
- 4x 3.5" Hot-swap drive bays
- 2x 2.5" internal drive bays
|
| Peripheral |
- 1x slim DVD-ROM drive bay (shared with 1x 2.5" internal drive bay)
|
| |
|
|
| 250W Flex ATX Multi-output Bronze Power Supply |
|
AC Voltage
|
- 100 - 240V, 50 - 60Hz, 5Amp
|
|
+5V
|
|
|
+12V
|
- Max:18 Amp; Min:1 Amp @100V-240V
|
|
-12V
|
|
|
+3.3V
|
|
|
5VSB
|
|
| Certification |
 Bronze Certified
|
| |
|
| BIOS Type |
- 128Mb SPI Flash EEPROM with AMI UEFI BIOS
|
| BIOS Features |
- Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.3
- ACPI 1.0 / 2.0 / 3.0 / 4.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.7.1
- UEFI
- RTC (Real Time Clock) Wakeup
|
| |
|
|
RoHS
|
|
| Environmental Spec. |
- Operating Temperature:
0°C to 40°C (32°F to 104°F)
- Non-operating Temperature:
-20°C to 60°C (-4°F to 140°F) - Operating Relative Humidity:
10% to 85% (non-condensing) - Non-operating Relative Humidity:
10% to 95% (non-condensing)
|
|
