Description
Manufacturer: ECS
Type of case: 5U Slide Out Rack Mount Case
Manufacturer Model: Previously sold as models 7000 series (fixed) - 8000 series (slide), also as Legacy and Loadmaster.
I belive this one is a Loadmaster Slide Out
Construction: TSC - Thermo Stamped Composite
My actual Approximate Measurements (in inches, Length x Width x Height) are:
Rack Size: 5U 19 x 24 deep x 8 3/4 high ID (1.75"=1U)
Case OD: 35 1/2 x 22 1/2 x 13 1/2
Case ID: Aprx 34 x 20 3/4 x 11 1/4
Case length ID is made up of case Body + Lids (30+2+2=34)
Shipping dimensions: 35 x 23 x 14
Shipping Cubic inches: 110 …..oversize 2
Weight in lbs: 47
Inside Dimensions are max of the case without anything in it. Outside Dimensions are max with all bumps and handles. Shipping dimensions is the max OD rounded up to the next inch as the shipper will do. Please note cases with a combined length and girth (Cube) over 130 inches are “oversize 3” and very expensive to ship, be sure to check the cost before bidding. Weight is as shown with whatever foam is in it and may not be an accurate reflection of the true weight of the case if it were empty. If needed please check the manufactures website for the true empty weight.
My actual Approximate Measurements (in inches, Length x Width x Height) are:
Actual Case OD: 35 1/2 x 22 1/2 x 13 1/2
Actual Case ID: 34 x 20 3/4 x 11 1/4
Shipping dimensions: 35 x 23 x 14 (Actual OD rounded up to next inch)
Shipping Cube: 110 (Shipping Cube is Girth plus Length (not the actual cube))
Weight in lbs: 47 lbs as shown
Dimensional Weight: 81 lbs (Dimensional Weight is LxWxH/139)
About My Dimensions
Inside Dimensions are max of the case without anything in it, No Foam.
Outside Dimensions are max with all bumps and handles.
Weight is as shown with whatever is in it and may not be an accurate reflection of the true weight of the case if it were empty.
These dimensions are my old eyeball and a tape measure (not a micrometer).
Features:
Loadmaster Stacking Pattern
Slide Out Shock Mounted 5U x 24 deep rack
4 Cam Latches ( 2 on each Lid)
4 Lockable Loops on Latches ( 6th picture)
4 Spring Return Carry Handles
Black Color Hardware
Pressure Relief
8 Lid aliment plates (4 on each Lid )
Steel Side Lid Hangers (for lid storage when open in use)
Accessory Pockets in both lids
Some with Velcro Cable Storage Straps
Color Green
Appearance of case or lot:
Good Case with Normal Scuffs, Scratches, Dings, Dirt, Dust, Stickers and Sticker Residue for a used case.
Damage: None
Quantity Available at time listing was created: 48 in
4 listings with lockable latches and without lockable latches
My inventory # ECS Grn LM Sld w/locks 5Ux24 G1 G1014 of 17
General Original Manufacturer Info:
Product Specification-Authorized for Reprinting
? TSC Composite Case Exterior
? Riveted TSC Composite and Aluminum CEA-310 Rack with Eight Diagonally Attached Shock Mounts
? 10-32 Nut-Bar Fasteners for Equipment Panels
? Two Removable Covers
? External Draw Pull Latches
? Water Tight Closures
? Case-to-Case Stacking Features
? Recessed Hardware
MIL-STD-810F Performance Testing
• High and Low Temperature – 7000 Series rackmount cases and their components shall not exhibit any significant degradation in performance and/or strength when exposed to temperatures ranging from -65º F to +185º F in accordance with MIL-STD-810F, Methods 501 and 502 for storage and operational conditions.
• Drop – 7000 Series rackmount cases with covers in place shall show no evidence of damage and/or degradation when drop tested in accordance with MIL-STD-810F, Method 516, Procedure IV from a height of 24 to 48 inches onto a 2-inch thick plywood surface backed by concrete. Impacts shall be conducted on all corners, flats and edges for a total of 26 drops.
• Basic Transportation Vibration – 7000 Series rackmount cases with covers in place shall show no evidence of damage and/or degradation when exposed to vibration environments for a duration of 30 minutes per mutually perpendicular axis when tested in accordance with MIL STD-810F, Method 514, Procedure I, Basic Transportation.
• Loose Cargo Bounce – A 7000 Series rackmount case positioned in the upright position and with the covers in place shall show no evidence of damage and/or degradation when exposed to Loose Cargo Transportation environments for 30 minutes when tested in accordance with MIL-STD-810F, Method 514, Procedure II.
• Wind Blown Rain – 7000 Series rackmount cases with the covers installed shall show no evidence of water intrusion and/or damage as a result of exposure to 40 mph wind blown rain conditions when tested in accordance with MIL-STD-810F, Method 506.4, Procedure I.
• Wind Blown Sand and Dust – 7000 Series rackmount cases with covers installed shall show no evidence of damage and/or sand or dust intrusion when tested in accordance with MIL-STD-810F, Method 510, Procedures I & II – Blowing Sand and Dust.
• Fungus Growth – 7000 Series rackmount cases and their components shall consist of materials that will not support fungus growth when tested in accordance with MIL-STD-810F, Method 508.
• Low Pressure – 7000 Series rackmount cases shall not be damaged and/or degraded when exposed to low pressure environments when tested in accordance with MIL-STD-810F, Method 500, Procedures I and II.
Shipping facts you should know:
On large cases the shipping is the cost for one multiplied by the number of cases purchased. There is no combined shipping discount on large items that cannot be combined, the eBay calculator is often wrong. I am happy to place smaller cases that can fit in larger ones for free shipping on the smaller one
Large items are charged for dimensional shipping weight by UPS (and FedEx)
(2017)
length x width x height / 139 domestic or 139 international
Packages over 130” length + girth have an oversized surcharged of $60
UPS will take packages up to 165” length + girth, the eBay calculator does not work over 140”
Transit shipping cases are frequently shipped unpackaged with just a shipping tag.
Buyers may pick up their purchases: (located in West Bridgewater Mass) No charge, No problem. We just need to figure a mutually convenient time.
Buyers may arrange their own shipping: just send me the shipping documents to print, must be a carrier with tracking suitable to Pay Pal.
Foreign Buyers: Welcome but shipping is usually cost prohibitive.
Returns: Sorry due to the high cost of shipping returns are accepted but discouraged please be sure of your purchase. Buyer pays the return shipping cost.
Feedback: Please let me know of any problems with your item before leaving feedback. I leave feedback for every sale.
Thanks for viewing my listing
|
