• Set iron/heat press to 120°C • Place a sheet of baking paper or heat-resistant paper on top of the badge/nameset before pressing • Press firmly for 3-4 seconds on a flat surface • Important: Always let it cool down completely (cold peel) before removing the plastic film. • Do NOT peel when hot or warm – peeling too early will cause the glue to lift off before it bonds properly, leaving only a shadow or damaging the print. Extra Notes: • If using a household iron, please be extremely careful with the temperature setting. The process may take longer and require several slow presses to succeed.
Note: Any questions, please contact us before purchasing.