M.2 NVMe To PCIe 16x Riser Graphics Card Extender M2 x16 PCI-e Non-USB Transfer
M.2 NVMe To PCIe 16x Riser X11050ti 1060ti 1080ti RX580 Graphics Card Extender M2 x16 PCI-e For NVIDIA AMD A N Card Btc Miner
Length is customizable,cable prices of different lengths are not the same,pls contact us if you need!
New design
Maximum Speed: PCIe Gen3.0 8Gbps.
Connector A: gen 3.0 PCIe x16
Connector B: M.2 NVMe
25cm 35cm 45cm 60cm
PCIe Gen3.0 8Gbps max
PCIE 3.0 transmission efficiency more than 2%.
EMI Shielding with Conducting Polymer
No need BIOS , without USB transfer, stable and durable.
Eight
CARDS measured, directly into the motherboard graphics with directly,
PCIE extended without power supply, without setting the BIOS, without
secondary USB transfer.
Product advantages:
1.
Wire advantage, using Taiwan imported wire, using high quality PCIe
connector, high frequency support PCIe 3.0 8G/bps stable transfer. The
BIOS does not need to set the speed reduction, the wire core wire
contains the power supply, and the extension cable of the mining type
motherboard does not need an external power supply, and the graphics
card is directly used.
2.
The differential signal has no via design, there is no signal
attenuation interference problem of parasitic capacitance and parasitic
inductance, and there is no CAF micro short circuit phenomenon. The PCB
uses high quality and low resistance high quality materials, PCB work
precision, PCB uses high TG plate, copper The thickness of the material
is thickened to 1 oz. The gold-plated gold content is sufficient. The
gold-plated foot has good electrical conductivity and can reduce the
blue screen of the crash caused by the increase of oxidation and rust
resistance. Thick copper thickening can increase the power supply
capacity to 36W. The product is durable.
3.
High-quality connectors and connector openings are designed. In
addition to x1, x4 x8 x16 graphics cards can be inserted, and the board
hardware compatibility is strong. The product is simple and easy to use,
100% power delivery test. Failure rate is less than 5 thousandths
4. Add fat and long design to make the board easier to install, the damage is low.
