FOR 2017-2023 Alfa Romeo Stelvio Outer Right Tail Light Lamp lens Housing Shell

Product Description

## Product Overview **1PC Right Passenger Side Outer Tail Light Lens Cover Housing Replacement** **IMPORTANT: This listing is for the RIGHT (PASSENGER) SIDE OUTER tail light LENS COVER ONLY. Does NOT include the full tail light assembly, bulbs, circuit board or inner tailgate light.** Exclusively designed as a cost-effective repair solution for **Alfa Romeo Stelvio (Type 949) 2017-2023** all trim levels (Base, Ti, Ti Lusso, Ti Sport, Quadrifoglio). This clear tail light lens cover replaces cracked, faded, yellowed, foggy or broken factory outer rear tail lamp lenses, restoring full lighting performance and factory appearance at a fraction of the cost of a full OEM tail light assembly. Precision injection-molded from OEM-spec polycarbonate for exact contour matching, fully waterproof when properly sealed with automotive silicone. ## Key Features 1. **OEM-Grade Optical Polycarbonate Construction** - Manufactured from high-transmittance automotive-grade polycarbonate (PC) material, identical light clarity to original factory lenses - Hard UV-stabilized coating prevents yellowing, hazing and cracking for 5+ years of outdoor use - High-impact resistance withstands road debris, minor impacts and car wash abrasion - **NOT cheap acrylic plastic that yellows and cracks quickly** 2. **Precision 1:1 Factory Fitment** - 3D-scanned directly from original Alfa Romeo Stelvio OEM outer tail light housing for exact contour alignment - Seamless gap-free fit to the factory tail light housing base, no trimming or modification required - Matches all factory outer tail light configurations (standard LED, adaptive, etc.) - Does not affect brake light, turn signal, running light or any factory lighting functions - Designed specifically for left-hand drive (LHD) US/Canada market passenger side position 3. **Significant Cost Saving Repair Solution** - Saves over $300 compared to purchasing a full OEM outer tail light assembly - Fixes common tail light damage: cracks, spider webbing, yellowing, fogging, water intrusion - Retains your original fully functional tail light internal components (bulbs, LED circuit board, housing base) - Ideal for body shops, collision repair and DIY maintenance 4. **Weatherproof & Durable Build** - Fully compatible with automotive silicone sealant for a 100% waterproof and dustproof seal - Withstands extreme temperatures from -40°F to 176°F (-40°C to 80°C) - Resists road salt, UV radiation, rain, snow and harsh environmental conditions - Smooth non-porous surface is easy to clean with regular car wash products 5. **Direct Replacement Installation** - Direct replacement for the original factory outer tail light lens cover - Requires removal of the tail light assembly and use of automotive silicone sealant (not included) - No modification to the vehicle body or wiring required - Professional installation is strongly recommended for proper sealing and alignment ## Compatibility ✅ **Fits:** - Alfa Romeo Stelvio (Type 949) 2017, 2018, 2019, 2020, 2021, 2022, 2023 - All trim levels: Base, Ti, Ti Lusso, Ti Sport, Quadrifoglio - All US & Canadian left-hand drive (LHD) vehicles - All factory outer tail light configurations - **RIGHT (PASSENGER) SIDE OUTER TAIL LIGHT ONLY** ❌ **Does NOT Fit:** - Left (Driver) side tail light - Inner tailgate-mounted tail light - Alfa Romeo Stelvio 2024+ facelift models - Alfa Romeo Giulia, Tonale or any other Alfa Romeo models - Non-Alfa Romeo vehicles ## Specifications - **Material:** Automotive-Grade Polycarbonate (PC) with UV Hard Coating - **Lens Color:** Clear (matches factory original appearance) - **Quantity:** 1 Piece (Right Passenger Side Outer Tail Light Lens Cover Only) - **Installation:** Professional installation recommended; automotive silicone sealant required (not included) - **Package Includes:** 1 × Right Outer Tail Light Lens Cover + Installation Manual - **Warranty:** 1-Year Manufacturer Defect Warranty ## Installation Instruction 1. Remove the right outer tail light assembly from the vehicle following the factory service manual procedure (access from inside the trunk). 2. Preheat the tail light assembly in an oven at 100-120°C (212-248°F) for 10-15 minutes to soften the original factory sealant. *Alternative: Use a heat gun on low setting to evenly heat the lens edge.* 3. Carefully pry the old cracked/faded lens away from the tail light housing base using a plastic trim tool to avoid damaging the housing. 4. Thoroughly clean the housing groove and remove all residual old sealant, dirt and debris. 5. Test fit the new lens cover to confirm perfect alignment and gap-free fit before applying sealant. 6. Apply a continuous, even bead of high-quality automotive silicone sealant into the housing mounting groove. 7. Press the new lens cover firmly into the housing, ensuring full contact along the entire edge. 8. Secure the lens with masking tape or clamps and allow the sealant to fully cure for 24 hours at room temperature. 9. After full cure, reinstall the tail light assembly back onto the vehicle. 10. Test all tail light functions (brake, turn signal, running light) to confirm normal operation. ## Short Description for Listing Right passenger side outer tail light lens cover housing replacement for 2017-2023 Alfa Romeo Stelvio all trims. OEM-grade clear polycarbonate with UV anti-yellow coating, precision factory fit, waterproof when sealed. Cost-effective repair for cracked/faded/yellowed tail light lenses. Saves over $300 vs full OEM assembly replacement. **RIGHT SIDE OUTER LENS COVER ONLY, NOT FULL TAIL LIGHT ASSEMBLY.**

1. We Only accept PayPal payment temporary . We will only follow your address listed at the PayPal payment for the shipment.
 
2. Payment must be received within 7 days after auction ended. Unpaid dispute will be filed to eBay for non- payable bidders.
Paypal E-checks will be held until cleared.
1. All the items will be sent out to your Ebay Address within 1-3 business days after receive your cleared payment.Orders made on Sundays, and holidays will be processed on the next business day and will be shipped within 24 hours.
 
2. Please allow 7-15 business days for US/UK/AU/Canada/Japan/South Korea deliveries and 15-35 business days for international deliveries. Some shipments may take longer subject to your local customs authorities.
 
3. International Buyers – Please Note:
- Import duties, taxes and charges are not included in the item price or shipping charges. These charges are on the buyer responsibility.
- Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
1. We understand that sometimes an item may not turn out to be just what you need. Refund or replacement request is available within 2 weeks after parcel received & in original condition and packing.
 
2. Please contact us before returning items and we will provide the shipping address. DO NOT send without communication.
We open Monday to Saturday.
 
1. If you have any questions on our products, please contact us at any time. We answer every message within 24 hour period.
 
2. If you have any problems with your purchase, please contact us by eBay message and let us resolve the problem before leaving us a negative feedback. Our customer service representative is here to ensure that you are satisfied with our services.
1. Feedback is important to all of us participating on the eBay community. We are always working hard for maintain high standards of excellence and strive for 100% customer satisfaction. So yourPOSITIVE FEEDBACK is very important.
 
2. Here is an illustration showing how to leave the positive feedback, please follow the following step. Thank you so much. And welcome back to our store again.
 
feedback
feedback
Copyright © 2023 Dianxiaomi