60 Inch Foldable Tailgate LED Light Bar, 864 3-Row Ultra Bright LED, IP69K Full Waterproof Gel Filled Light Strip, Two 30 Inch Hard Light Strip Design, High Light Transmittance Skin-Friendly Squeeze Resistant Tail Light, 6 Modes Brake Reverse Flowing Turn Signal Hazard Double Flash Light with 4-Pin Trailer Harness for Pickup Truck Trailer SUV RV Van Boat
Overview
This upgraded 60-inch tailgate LED light bar adopts premium gel perfusion technology and IP69K high-level waterproof rating, featuring high light transmittance and skin-like squeeze-resistant surface to completely eliminate water ingress failure. Unique split design with two 30-inch hard light strips greatly simplifies installation. Equipped with 3-row ultra-high brightness layout and 864pcs high-density 2835 SMD chips, it supports 6 complete practical lighting modes. The durable gel-integrated body is flexible and compression-resistant, with drill-free adhesive mounting and standard 4-pin plug-and-play harness, universally fitting all DC12V vehicles and marine equipment for stable and safe rear warning lighting.
3-Row 864pcs Ultra-High Brightness LED Chips
Features professional 3-row dense arrangement design, built-in total 864pcs high-quality 2835 SMD ultra-bright LED chips, evenly divided into 288 red, 288 white, and 288 amber lamp beads. Compared with ordinary single-row and double-row tail lights on the market, this 3-row upgrade achieves higher luminous intensity, more uniform light output and wider irradiation coverage. The ultra-high brightness luminous beam provides excellent rear recognition in dark nights, heavy rain, fog and dim parking environments, strongly reminding following vehicles and effectively reducing rear-end collision risks to comprehensively upgrade driving safety.
6 Complete Upgraded Lighting Modes with Flowing Sequential Turn Signal
This tailgate light bar is fully upgraded with six practical independent lighting modes to cover all daily driving scenarios, including steady running light, high-bright brake warning light, full white reverse light, left and right sequential flowing turn signals, and center-to-side hazard double flash warning. Different from static ordinary tail lights, the smooth dynamic flowing turn signal provides clearer and more eye-catching visual warnings, helping surrounding drivers accurately judge vehicle intentions and greatly improving overall driving safety on various road conditions.
Gel Perfusion Design & IP69K Top-Level Waterproof, Squeeze Resistant & No Water Ingress
Adopts advanced full gel perfusion process with ultra-high light transmittance, ensuring bright and uniform light transmission without dimming or light loss. The unique skin-like surface is flexible and tough, effectively resisting daily extrusion, bending and external impact without deformation or damage. Upgraded toIP69K industrial high-level waterproof rating, far exceeding ordinary IP65 products. The fully sealed gel integrated structure completely blocks rainwater, snow, dust and high-pressure water flushing, fundamentally avoiding internal water ingress, fogging and short circuit problems, achieving all-weather stable operation in various extreme harsh environments.
Split 2×30 Inch Hard Strip Design, Easier & Faster Installation
Different from traditional one-piece ultra-long soft light strips, this tailgate light bar adopts a unique split structure composed of two independent 30-inch hard light strips. The segmented hard strip design avoids the torsion and wrinkling problems of integrated long strips during installation, allowing more accurate positioning and flat pasting. It perfectly adapts to various flat and curved tailgate surfaces, greatly reducing installation difficulty. Cooperated with high-strength automotive adhesive tape and optional fixing screws, it realizes drill-free damage-free installation with more neat, firm and aesthetic installation effect.
Inline Fuse Short Circuit Protection & Universal 12V Compatibility
Built with a premium inline safety fuse, which provides effective overcurrent, overload and short circuit protection to prevent circuit burnout, light strip damage and hidden safety hazards during long-term use. Adopting universal DC12V wide voltage design, this multi-functional tail light is perfectly compatible with most 12V vehicles and equipment including pickup trucks, trailers, SUVs, RVs, vans and marine boats. It replaces multiple single-function rear lights, realizing neat and integrated rear lighting upgrade with stable and reliable performance.
Product Features
1. Foldable flexible 3-row tailgate LED light bar with total 864pcs high brightness 2835 SMD lamp beads.
2. Triple color matching: 288 Red + 288 White + 288 Amber for multi-functional rear lighting output.
3. Six upgraded independent lighting modes including sequential flowing turn signal and hazard double flash.
4. Upgraded IP69K industrial waterproof grade + full gel perfusion sealing technology, completely anti-extrusion, no water ingress, super durable for harsh environments.
5. Split 2×30inch hard light strip structure, easier positioning and fitting, no wrinkling, simpler installation than integrated strips.
6. Super high visibility luminous beam enhances rear vehicle recognition and driving safety greatly.
7. Built-in inline fuse to prevent short circuit and overload damage for long service life.
8. Drill-free installation with strong automotive adhesive tape, extra screws for optional reinforcement.
9. Standard 4-pin flat trailer color coded harness for plug-and-play quick wiring connection.
10. Universal DC12V voltage fits pickup truck, trailer, SUV, RV, van and marine boats widely.
11. Dynamic sequential flowing turn signal offers more striking warning effect than static tail lights.
12. Independent reverse full white light improves reversing visibility at night and dark parking lots.
13. Hazard double flash mode flows from center to both sides for emergency road warning.
14. Compact slim design will not affect the original appearance and normal use of the tailgate.
15. High toughness silicone material resists aging, scratch and long-term outdoor exposure damage.
16. Complete installation accessories are included for one-stop use without extra purchase.
Light Color Division: Red for Brake & Running, White for Reverse, Amber for Flowing Turn & Warning Flash
Special Working Note: Brake signal takes priority; turn signal only activates after releasing brake pedal
Six Upgraded Lighting Modes Description
1. Running Mode: All red LED segments keep steady low brightness light output as daytime rear marker light.
2. Brake Mode: All red LEDs light up at full high brightness to remind rear vehicles of deceleration.
3. Reverse Mode: All white LED sections fully light up to illuminate rear ground for safe reversing.
4. Left Turn Signal Mode: Left side amber LEDs light up in sequential flowing dynamic effect.
5. Right Turn Signal Mode: Right side amber LEDs light up in sequential flowing dynamic effect.
6. Hazard Double Flash Mode: Left and right amber lights flow sequentially from center to two sides synchronously.
Wire Connection Matching Tips
Green Wire: Connect to Right Turn Signal & Brake Circuit
Yellow Wire: Connect to Left Turn Signal & Brake Circuit
Brown Wire: Connect to Running Marker Light Circuit
White Wire: Main Ground Negative Pole
Single Independent White Wire: Special Connection for Reverse Light Function
Installation Steps Guide
1. Clean the tailgate mounting surface thoroughly, wipe away dirt, wax, water and grease completely.
2. Peel off protective paper of the back adhesive tape, firmly stick the whole light bar flat on the cleaned surface.
3. Align the wiring harness and connect each color wire to corresponding vehicle circuit according to wire guide.
4. Use the 4-pin flat trailer adapter for quick plug-and-play connection of brake and turn signal functions.
5. Tap the independent white wire into vehicle reverse light circuit to activate full white reverse lighting mode.
6. Use matching screws and zip ties to fix wires tightly to avoid shaking and abrasion during driving.
Important Installation Reminders
1. This light strip is universal fit for most DC12V vehicles, please measure your tailgate installation length before purchasing to avoid mismatch.
2. Screws are optional auxiliary fixing accessories; strong adhesive tape can complete stable installation alone without drilling holes.
3. Ensure the mounting surface is fully dry and clean before pasting the light bar to prevent adhesive falling off in high temperature or rainy days.
4. When brake signal and turn signal input at the same time, brake light will work preferentially; turn signal will recover after releasing brake pedal.
WHY CHOOSE US
This upgraded 60-inch tailgate LED light bar stands out with core competitive advantages: advanced full gel perfusion technology with high light transmittance and anti-extrusion skin-like surface, top-level IP69K waterproof performance to completely avoid water ingress failure. Adopting split 2×30-inch hard strip design for ultra-convenient installation, paired with 3-row 864pcs ultra-high brightness LED chips for outstanding luminous effect. It supports six practical flowing lighting modes, with drill-free plug-and-play installation and built-in fuse safety protection, perfectly fitting all 12V vehicles and marine equipment for long-lasting, stable and safe rear lighting upgrade.
Universal Applications
Pickup & Off-Road Vehicles: Perfect for all DC12V pickup trucks, SUV, UTV and off-road vehicles as full function tailgate auxiliary light.
Trailer & RV Camper: Suitable for cargo trailers, travel RV, camper van and utility trailers for rear warning lighting.
Marine Equipment: Applicable for yachts, fishing boats and water transport vehicles with IP65 waterproof anti-corrosion performance.
General Transport Vehicles: Ideal for van, small cargo car and engineering vehicles to control night working lights and auxiliary electrical appliances.
Package Include
1 × 60 Inch Foldable Triple Color Tailgate LED Light Strip W/ 3M Adhesive Tape
1 × 4-Way Flat Female to Color Coded Pigtail Wiring Adapter
Full Set Matching Mounting Screws, Wire Connectors and Fixed Zip Ties
We only accept eBay Payments .
All items will be dispatched within 3 business days once your payment is fully processed.
Please double-check that your registered eBay shipping address is accurate before completing payment.
Unpaid item cases will be automatically opened after 4 days due to eBay’s final value fees applicable to all transactions.
Buyers shall be responsible for all applicable taxes and surcharges for remote delivery areas.
Shipment to thecontiguous 48 US statesis available via USPS, UPS, FedEx, SpeedX, Gofo, UinUin and Yanwen, as well as DHL eCommerce for fast delivery.
All orders will be dispatched within 3 business days upon payment confirmation.
In-store self-pickup service is not available.
We shall not be liable for delivery failures caused by incomplete or inaccurate shipping addresses provided by buyers.
Buyers cover shipping for PR, Alaska & Hawaii.
We do not ship to US territories, APO/FPO or PO Boxes address.
No cancellations or refunds can be processed after shipment.
Delivery times of buyer-chosen expedited services are not guaranteed.
We offer returns, refunds within 30 days for all unused and unmarked items.
If you receive incorrect or defective goods, please take clear photos and send them to us for verification.
We will safeguard your interests as promised. Kindly reach out to us via eBay Messages first instead of opening a return request directly.
We appreciate your patronage and constantly strive to elevate our customer service while upholding our commitment to superior quality.
We will promptly submit positive feedback upon receipt of your payment.
We highly value positive feedback from buyers just as you do. Kindly refrain from leaving neutral or negative feedback.
Should you encounter any problems with your order, please reach out to us before submitting feedback.
We will gladly work with you to resolve any issues to your satisfaction.
All rights of final interpretation are reserved by our company.
Office Hours (HK Time): Monday to Friday, 9:00 – 18:00
We aim to reply to all messages within 24 hours. If you receive no response after 24 hours, kindly check your email spam folder.
For orders of 3 items or more, feel free to contact us to inquire about our bulk discounts.
We are a trusted top-rated eBay seller and a well-established automotive supplier based in China with our own manufacturing plant in Foshan. We have accumulated outstanding positive feedback thanks to our consistent premium product quality.
Our company is a leading direct manufacturer & supplier specializing in professional automotive LED lighting systems.All our products adopt cutting-edge lighting technology, featuring cost-effective pricing and simple DIY installation for all users.