Elga LA632M2 Analyzer feed pump

  • Maximum open flow 2.5 l/m (1.8 l/m at 2.4 bar)
  • Operating voltage 24VAC (from transformer)
  • Inlet/outlet connection: 8mm OD tubes
  • Plumbing option1: water on demand: preset operating pressure 35 psi. 
  • Plumbing option2: recirculation. In this method the pump can only be feed from a reservoir. It is important to put a flow restrictor (1l/min) and a 1bar (15psi) non –return valve in the return line to the reservoir. This will limit the flow back to the reservoir and reduce the pump speed. This will increase the life of the pump when operated in this mode. The system will then deliver from the recirculation loop as the pressure starts to fall. The system will rise in pressure (35psi) during recirculation but as the demand increases to its maximum then the pressure will reduce (effected by the NRV pressure).
  • Internal pressure relief valve preset at 135 psi

We are a small company based in Thailand that sells new and surplus product and develop channels to purchase such product. We are not an authorized dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available directly from the factory or authorized dealers. Because we are not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.

 

We offer free standard shipping to selected countries in Asia, Europe and America. Please contact us via the Ebay Message System/Contact Seller.