Non-Contact Pinless Moisture Meter for Wood Concrete Brick Plaster Floor Wall
 | 🎨 Bright Color LCD Display – Easy-to-read color screen with both numeric and analog readouts. Works in bright sunlight or dim crawl spaces. The large display shows current reading, MAX/MIN values, and battery status all at once—no squinting required. 🔊 Audible Alerts with DRY/RISK/WET Indicators – Instant visual and audio feedback. The meter automatically classifies each reading as DRY, RISK, or WET with corresponding beeps—urgent beeps when moisture hits the WET range. No need to interpret raw numbers; the meter tells you exactly when a surface is safe to work on or needs attention. 🔋 Rechargeable Lithium Battery with Type-C Charging – Built-in 3.7V 400mAh lithium battery. No need to constantly buy and replace disposable batteries. Charge via standard USB Type-C—just like your phone. The meter runs on approximately 35mA and features a 30-minute auto power-off to conserve battery life. (Note: Auto power-off can be disabled if needed.) |
 | ⚙️ Adjustable Limit Values – Customize the DRY/RISK/WET thresholds to match your specific materials and standards. Set the RISK lower limit between 0–50 and WET lower limit between 51–100. Factory defaults are 30 for RISK and 60 for WET—but you have full control. 🔄 MAX/MIN & Data Hold – Locks readings on screen with the "HOLD" function, perfect for recording measurements in tight spaces or awkward positions. Track maximum and minimum values during surface scans to identify problem areas quickly. 💡 One-Hand Operation – Simple, intuitive controls. Short press to power on/off. Calibrate in air with one button press. Measure by placing the spherical sensor flat against the surface. Move the meter to scan larger areas—the display tracks current, maximum, and minimum values in real time. |
 | 📏 20–40mm Penetration Depth – Sees moisture beneath the surface, not just on top. The sensor reaches 20–40mm deep into wood, concrete, plaster, and brick—catching hidden moisture problems before they become visible damage. Perfect for detecting leaks inside walls, under flooring, or within masonry. |
 | 🔵 Truly Non-Destructive Testing – No pins, no probes, no surface damage. Unlike traditional pin-type meters that leave unsightly holes in finished wood, drywall, or flooring, this meter uses a spherical humidity sensor that reads moisture without ever piercing the surface. Test finished floors, painted walls, or delicate cabinetry with complete confidence. |
Product Parameters
| Parameter | Specification |
|---|---|
| Product Name | Non-Contact Wood Moisture Meter |
| Model | 8805T |
| Measurement Principle | Non-contact spherical humidity sensor |
| Measurement Range | 0–100 (Relative Humidity Units) |
| Measurement Depth | 20–40mm (material-dependent) |
| Display | Color LCD with analog/numeric readout |
| Battery | 3.7V Lithium 400mAh (Type-C charging) |
| Operating Current | ~35mA |
Default Material-Specific Limits:
| Material | DRY | RISK | WET |
|---|---|---|---|
| Wood | <50 | 50–80 | >80 |
| Cement | <25 | 25–50 | >50 |
| Plaster | <30 | 30–60 | >60 |
📦 Package Includes:
1 × Non-Contact Wood Moisture Meter (Model 8805T)
1 × User Manual
1 × Velvet Pouch
| Material | DRY | RISK | WET |
|---|---|---|---|
| Wood | <50 | 50–80 | >80 |
| Cement | <25 | 25–50 | >50 |
| Plaster | <30 | 30–60 | >60 |
