Factory-99
1pc,1-5kg Miniature DYLY-106 S-Type Load Cell Engineering Equipment-fastdelivery

Details

With design of anti-pressure bi-directional bearing, have high precision and good stability.The design of cover plate, fully protect the sensor chip, use nut fixed interface, avoid strong drag to cause the interface to fall off.
Equipped with international superior sensor range.S beam design,tension and/or compression loading (0-100KG) possible.
The sensor is a high-precision test component,easy to install. In order to ensure the accuracy of the measurement, the transmission of the control force should not be affected by the eccentric load and the lateral direction.
Alloy steel, hermetically welded/sealed by adhesive inside,oil-proof, waterproof and anti-corrosion.Safe and anti-explosive product, can be used in bad environment and hazardous areas. Suitable for mixing station, batching machine, asphalt station, etc.
 
Specifications:

Capacity: 5KG

Specification

Rated Output 2.0 ± 0.05% mV / V
Non-linearity 0.03% F.S.
Hysteresis 0.03 % F.S.
Creep(30min) 0.03 % F.S.
Repeatability 0.03 % F.S.
Temperature Effect On Output ± 1% F.S. / 10ºC
Temperature Effect On Zero 0.03 % F.S. / 10ºC
Input Impedance 350 ± 20Ω
Output impedance 350 ± 5Ω
Insulation ≥ 5000MΩ/50VDC
Recommended Excitation 10~15V
Operation Temperature Range - 20 ~ 80 ºC
Safe Overload 150 % F.S.
Ultimate Overload 200 % F.S.
Cable Color Code

Input: Red(+) Black(-);

Output: Green(+) White(-);
 
Wire connection method:
Red--Power supply positive
Black--Power supply positive
Green--Signal positive
White--Signal negative
Yellow(Covered by heat shrink tube)--shielded
 
Package Included:
1 x Weighting Sensor
 

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.

If so, you can bid on this item only if you are an authorized purchaser.

If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

This item has been cleaned and treated according to the manufacturer's instructions.

A complete and correct shipping address is essential Customers with shipping addresses outside of the U.S. are responsible for all duties and import taxes. Please contact your customs for information

We accept PayPal only. We will ship out the item after receiving cleared payment.

Returns could be accepted within 30 days after receipt of the item

1pc,1-5kg Miniature DYLY-106 S-Type Load Cell Engineering Equipment-fastdelivery

Details

With design of anti-pressure bi-directional bearing, have high precision and good stability.The design of cover plate, fully protect the sensor chip, use nut fixed interface, avoid strong drag to cause the interface to fall off.
Equipped with international superior sensor range.S beam design,tension and/or compression loading (0-100KG) possible.
The sensor is a high-precision test component,easy to install. In order to ensure the accuracy of the measurement, the transmission of the control force should not be affected by the eccentric load and the lateral direction.
Alloy steel, hermetically welded/sealed by adhesive inside,oil-proof, waterproof and anti-corrosion.Safe and anti-explosive product, can be used in bad environment and hazardous areas. Suitable for mixing station, batching machine, asphalt station, etc.
 
Specifications:

Capacity: 5KG

Specification

Rated Output 2.0 ± 0.05% mV / V
Non-linearity 0.03% F.S.
Hysteresis 0.03 % F.S.
Creep(30min) 0.03 % F.S.
Repeatability 0.03 % F.S.
Temperature Effect On Output ± 1% F.S. / 10ºC
Temperature Effect On Zero 0.03 % F.S. / 10ºC
Input Impedance 350 ± 20Ω
Output impedance 350 ± 5Ω
Insulation ≥ 5000MΩ/50VDC
Recommended Excitation 10~15V
Operation Temperature Range - 20 ~ 80 ºC
Safe Overload 150 % F.S.
Ultimate Overload 200 % F.S.
Cable Color Code

Input: Red(+) Black(-);

Output: Green(+) White(-);
 
Wire connection method:
Red--Power supply positive
Black--Power supply positive
Green--Signal positive
White--Signal negative
Yellow(Covered by heat shrink tube)--shielded
 
Package Included:
1 x Weighting Sensor
 

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.

If so, you can bid on this item only if you are an authorized purchaser.

If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.

This item has been cleaned and treated according to the manufacturer's instructions.

A complete and correct shipping address is essential Customers with shipping addresses outside of the U.S. are responsible for all duties and import taxes. Please contact your customs for information

We accept PayPal only. We will ship out the item after receiving cleared payment.

Returns could be accepted within 30 days after receipt of the item

On Mar 12, 2026 at 13:25:45 PDT, seller added the following information:
 

On Jun 18, 2026 at 16:35:01 PDT, seller added the following information:

Datacaciques