I. Basic Parameters
Model: ERIKC DLLA144P1417
OE Equivalent Number: 0433171878
Compatible Injectors: 0445120024, 0445120044, 0986435527 (CRIN2-16, 1600bar)
Nozzle Specifications: 6 holes × 0.14mm, Spray Angle 144°
Working Pressure: Maximum 1600 bar
Material: High-speed steel + vacuum hardened, needle valve black coating for wear and corrosion resistance
Dimensions/Weight: Approx. 60×15×15mm, Net Weight Approx. 45g
Warranty: 12 months (ERIKC brand new quality guarantee)
II. Compatible Engines and Vehicle Models
Compatible Engine: MAN D2066LF Series 10.5L Diesel Engine (2002–2015)
Compatible Vehicle Models: MAN TGA Series (18.410/18.440/18.480, etc.)
Early MAN TGS/TGX Models
Original Part Number: MAN 51 10100 6049
III. Core Features
1600bar High-Pressure Fine Atomization: 6-hole precision nozzle, droplet size 10–12μm, uniform atomization, strong penetration, improved combustion efficiency by 6–10%, significantly reduced black smoke and NOx emissions.
High-Speed Precision Needle Valve Response: Precise needle valve lift control, supports pre-injection + main injection, reduced idle noise by 4–5dB, smoother cold start, and more linear power output.
ERIKC Military-Grade Manufacturing: Needle valve components are ground to micron-level precision, ensuring a leak-free sealing surface. Black coating treatment provides temperature resistance from -40℃ to 350℃, resisting carbon buildup and corrosion. Flow error ≤±1%, ensuring high interchangeability. Completely replaces the original: 1:1 direct replacement for DLLA144P1417, no modification required; after replacement, matching the original injector restores original factory performance.
IV. Common Faults and Replacement Recommendations
Applicable Faults:
Poor injector atomization, black smoke, high fuel consumption
Insufficient engine power, weak acceleration, idling vibration
Difficult cold start, large return flow, unstable rail pressure
Over 200,000 km mileage, worn injectors, severe carbon buildup
Replacement Tips:
Recommended to replace all 6 cylinders simultaneously to avoid engine imbalance caused by flow differences
Replace with new copper gaskets and seals to prevent high-pressure leakage
Calibrate the flow rate on a test bench after installation to ensure uniform injection
V. Installation Points
Installation Torque: Injector cap tightening 55±5 Nm
Cleaning Requirements: Thoroughly clean the injector body before installation to prevent impurities from entering the assembly
Inspection Points: No blocked nozzles, no damage to the needle valve, intact sealing surfaces
VI. Interchangeable Models
DLLA144P1417 0433171878, identical to ERIKC DLLA144P1417
Welcome to ERlKC Diesel injector Parts Store!
Manager：Funda
There are many auto parts in our shop.If you can't find the accessories you needyou can contact me.Thank you!
Condition:
100% NEW , high quality, easy to install
Please make sure the interchange partnumber matches the part you are replacing
Please check our photos and make sure thepart shown looks identical to your stock one.
[VEHICEL APPLICATION]:Most Car
[MATERIAL]:We only use the highest grade materials,built to Strict Quality Control Standards, Meets the OEM standards.Every product must take inspected and tested multiple times before the shipment.
[NOTICE]: Please use the year/make/model drop down bar confirm the compatibility before purchasing. And make sure our part number is the same with your existing one before purchase!
[WARRANTY]: Order from ERIKC, Please recognize our brand name: ERIKC , We can't guarantee the quality of other sellers provided can be same as ours.And if our products bring your any trouble,please contact us,We will help you solve out immediately.
100% Brand New , High Quality .
Shipping:
Payment:
Warranty and Guarantee:
Other Policies: