K-sport Coilovers
© Copyright 2025 Regal’s Motorsport. All rights reserved.
eBay Template Designed & Developed By eBayStoreDesign.org
for Nissan FAIRLADY 350Z VQ35DE 16 Row Oil Cooler Kit, 02/08->07/01
Product Descriptions
The Nissan FAIRLADY 350Z VQ35DE is a well-established Nissan performance application used for tuned road, track and drift builds where consistent oil-temperature control can be important under sustained load. A vehicle-specific 16-row full-flow sandwich-plate engine-oil-cooler kit for Nissan FAIRLADY 350Z VQ35DE, catalogued for 02/08->07/01. It combines the SKADI cooler with the hoses, fittings and oil-system hardware listed in the confirmed component record. Cooler mounting brackets are not included.
Key features
- 16-row SKADI AN-10 oil cooler
- Nissan FAIRLADY 350Z VQ35DE application
- Full-flow sandwich-plate arrangement
- Standard-filter version
- 02/08->07/01 catalogue coverage
- Cooler mounting brackets not included
Design details
The confirmed component record uses 6 distinct BOM lines, combining the 16-row cooler with the specified hose, fittings and engine-side take-off hardware. As an SKO-3 kit, it does not include the vehicle-specific brackets needed to mount the cooler to the car.
On the car
The compact 16-row core adds dedicated heat-exchanger area while keeping the package manageable where installation space is limited. This non-thermostatic configuration routes oil through the cooler whenever the engine is running.
Fitment notes
Catalogued for Nissan FAIRLADY 350Z VQ35DE, covering 02/08->07/01. Confirm the exact engine, oil-filter interface, sealing face, centre-spigot engagement and available installation clearance before fitting. Plan the cooler position and hose route before cutting and assembling the hose. SKO-3 kits do not include the brackets required to mount the cooler to the car; select a suitable airflow position and fabricate or source secure mounting brackets. The recorded filter thread is M20×1.5. Thread compatibility alone does not confirm fitment: check the sealing-face diameter, centre-spigot engagement, filter clearance and surrounding installation space. Confirm the exact engine and production year before ordering.
Important: Check every BOM item against the supplied kit before installation. Keep hoses clear of exhaust heat, sharp edges and moving parts; prime the oil circuit, pressure-test it, verify oil pressure and check for leaks before driving. Monitor oil temperature and avoid over-cooling during cold or low-load use. Mount the cooler securely and check clearance to bodywork, airflow paths and surrounding components before use.
A 16-row full-flow sandwich-plate oil-cooler kit for Nissan FAIRLADY 350Z VQ35DE, supplied with the exact components listed above. Cooler mounting brackets are not included.
What’s in the box?
- 1 × SKADI 4m AN-10 hose, nylon with blue fleck (SKO-001)
- 2 × SKADI AN-10 45 Degree Fitting Black (SKO-007)
- 2 × SKADI AN-10 Straight Fitting Black (SKO-006)
- 1 × SKADI Oil filter sandwich plate w. AN-10 ports (SKO-015)
- 2 × SKADI AN-10 90 Degree Fitting Black (SKO-008)
- 1 × SKADI Mocal Style Oil Cooler 16-rows, black with SKADI Logo, AN-10 (SKO-003)
We are Regals Motorsport Ltd, Performance braking specialists. All enquiries are welcome, please contact us today for expert advice.
1: If you wish to cancel your order:
(a) you can notify us. See the Contact Us page for details; or
(b) where goods have already been dispatched to you, by returning goods to us in accordance with clause 4.2 below. The cost to safely and securely return any unwanted items lies solely with the purchaser.
2: Any goods for return must be notified to us in writing within 14 working days commencing from the day after receipt. Any non-faulty goods returned outside of the 7 day period without notice during the period we reserve the right to refuse.
3: The rights to return the goods to us as referred to in clause 4.2 will not apply in the event that;
a) the product has been fitted
b) if goods are not returned to us in the same condition as sent out, the returned items may be subject to a charge at Kage Trading Limited t/a K-Sport Racing’s discretion. This charge will reflect any damage or repair needed to the item and could be set at an amount up to and including the full original cost of the item.
c) the product has been manufactured to individual requirements and/or on a special order basis.
d) the product has been sold/passed on to a third party. Any goods that are damaged in transit on return to K-Sport Racing due to poor packaging or lack of care on your behalf will not be refunded and will be returned to sender. Please ensure all returns are packaged to the same level as when initially received. We require all original manufacturer/branded packaging to be enclosed.
4: Some of the items available from K-Sport Racing will require a signature upon receipt. Prior to signing for goods we ask that you check that the goods are both undamaged and that all goods are in the consignment that should be. Signing for the goods is an acceptance that everything in the delivery is as it should be and undamaged. If your order is being sent to a work address please ensure that the person signing for the goods on your behalf, if not yourself, is aware of what needs to be done on the arrival of the delivery. If you inform us of damages or shortfalls after signing for a consignment it makes it extremely difficult to make a claim from the couriers and some couriers will not accept liability. Claims for damages and shortfalls will be processed within 48 hours.
5: In the event of an alleged defect with goods fitted and used but still under warranty, the purchaser must return the goods to us for inspection and assessment of the fault. If the defect is deemed a fault covered by warranty and still within the cover period we will pursue the claim with the utmost importance. As outlined below, please contact us prior to making any returns so that we are aware of the return initially and also so we can begin to establish if the fault is one that is covered by the terms of the warranty and ensure that the product is still within the warranty period.
The provisions of these clauses do not affect your statutory rights.
We accept payment through Paypal, Google Pay, Visa, Master Card and American Express etc..
Please note this item has an estimated delivery time of 3-4 weeks.