Description
500W ER11 12000RPM DC Brushless Spindle Motor w/ Fixing Bracket Protective Cover Driver Power Supply
Features of Brushless Motor:
- ER11 500W air cooled spindle motor
- Brushless design for low interference
- High speed, low noise and smooth operation. Help your equipment to run stably
- Long service life and low maintenance cost
- Widely used for DIY projects
- Suitable for engraving PCB, acrylic board, drilling, etc.
Specifications:
- Spindle motor: brushless DC motor
- Working voltage: 4 8VDC (requires brushless driver and motor to run)
- Peak power: 500W
- Idling speed: 12000r/min
- Peak torque: 0.6 (N.m)
- Insulation resistance: > 2megohms
- Dielectric strength of insulation: 400V
- Diameter: front and rear cover 57MM/2.2"; motor middle part 55MM/2.2"
- Length of collet chuck: 43mm/1.7" at the collet holder (including nut and sandwich)
- The diameter of the chuck: 20mm/0.8"
- Total length of motor: 185mm/7.3" (including fan clamping part and motor)
- Spindle net weight: 2100G/4.6LB (with fixing bracket and protective cover)
- Driver: 180G/0.4LB; power supply: 680G/1.5LB
- The radial run-out of the main shaft is about 0.01-0.03
- Can be used to engrave materials such as metal and non-metal
- The spindle, with forced air cooling, can work for a long time
Package Included:
- 1 x Brushless Spindle Motor
- 1 x L-shaped Fixing Bracket
- 1 x Protective Cover
- 1 x Driver
- 1 x Power Supply
- 1 x Cable with Speed Control Knob and Switch
Note:
- It supports both 110V and 220V.
- It comes with a 3.175mm collet chuck by default. If you need other chucks, please contact us. Thank you!
Fixing Bracket:
Features of Brushless Motor:
- ER11 500W air cooled spindle motor
- Brushless design for low interference
- High speed, low noise and smooth operation. Help your equipment to run stably
- Long service life and low maintenance cost
- Widely used for DIY projects
- Suitable for engraving PCB, acrylic board, drilling, etc.
Specifications:
- Spindle motor: brushless DC motor
- Working voltage: 4 8VDC (requires brushless driver and motor to run)
- Peak power: 500W
- Idling speed: 12000r/min
- Peak torque: 0.6 (N.m)
- Insulation resistance: > 2megohms
- Dielectric strength of insulation: 400V
- Diameter: front and rear cover 57MM/2.2"; motor middle part 55MM/2.2"
- Length of collet chuck: 43mm/1.7" at the collet holder (including nut and sandwich)
- The diameter of the chuck: 20mm/0.8"
- Total length of motor: 185mm/7.3" (including fan clamping part and motor)
- Spindle net weight: 2100G/4.6LB (with fixing bracket and protective cover)
- Driver: 180G/0.4LB; power supply: 680G/1.5LB
- The radial run-out of the main shaft is about 0.01-0.03
- Can be used to engrave materials such as metal and non-metal
- The spindle, with forced air cooling, can work for a long time
Package Included:
- 1 x Brushless Spindle Motor
- 1 x L-shaped Fixing Bracket
- 1 x Protective Cover
- 1 x Driver
- 1 x Power Supply
- 1 x Cable with Speed Control Knob and Switch
Note:
- It supports both 110V and 220V.
- It comes with a 3.175mm collet chuck by default. If you need other chucks, please contact us. Thank you!
Fixing Bracket:
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
