🔥【FOXWELL JT400 Fuel Injector Cleaner & Tester】Professional 4-Cylinder Ultrasonic Cleaning & Diagnostic Tool for GDI + Traditional Injectors
The FOXWELL JT400 is a professional-grade fuel injector cleaning and testing system, supporting both traditional fuel injectors and Gasoline Direct Injection (GDI) injectors. It integrates ten major functions including Ultrasonic Cleaning, Uniformity Test, Sprayability Test, Leakage Test, Auto Mode Test, and On-Vehicle Cleaning, making it ideal for repair shops, 4S stores, and professional technicians.
Top Reasons to Choose Foxwell JT400 4-cylinder Fuel Injector Cleaner & Tester
● [ 100w Ultrasonic Cleaning ]: Start the machine, and press the key to modle 8. lt can perform ultrasonic cleaning on single or multiple injectors simultaneously, which can eliminate thoroughly blockages on the injector accessories and internal.
● [ Automatic Control/Real-time Monitoring ]: Microcomputer automatic control and digital display technology: the cleaning and detection process can be automatically controlled, and the main status parameters can be monitored in real time
● [ 2000ml Large Capacity of Cleaning Tank ]: Foxwell JT400 Fuel injector Cleaner only weighs 12KG, allowing to carry around. With 2000ML large capacity ultra cleaning tank, all injectors can be cleaned at one time, which save much time and more efficient.
● [ Multi Voltage Selection ]:: Foxwell JT400 Fuel Injector 4-cylinder Cleaner and Tester designs with various types of voltage output (12V, 70V & 120V) to be selected to adapt for different types of injector testing.
● [Various Parts equipped ]:: It is equipped with a variety of injector accessories for different needs.
● [ Environmental Friendly& Widely Use ]: The used cleaning fluid and testing fluid can be easily recovered. Support most of the automobile and motorcycles in the market. Applicable voltage is compatible with 110V or 220V.
● [ 5 Years Warranty ]: For damage caused by non-human factors, Foxwell promises to resend parts for free within 5 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.
Foxwell JT400 Main Functions:
1.Injector Test : Detect solenoid injectors resistance
2. UNIFORMITY TEST: Inspect fuel injection of each injector by observing its uniformity.
3. SPRAYABILITY TEST: Inspect atomization of each injector by observing.
4. LEAKAGE TEST: Inspect the sealing conditions of the injector needle valve under system pressure and to
find out the injector with oil droplet.
5. INJECTION TEST: Inspect injecting volume in 10 seconds meets the design specifications.
6. AUTO MODE test : Inspect the injectors according to the established program1 of the equipment
7. VARIABLE SPEED TEST: Inspect the injectors in variable speed conditions
8. ULTRASONIC TEST : Clean the carbon deposits inside the fuel injector through ultrasonic
9. ON-VEHICLE CLEAN : Cleaning the engine fuel supply pipeline, injector, and combustion chamber with the
machine does not require disassembling.
10. SYSTEM : Set the language and unit of the device operating system, query device information, and
restore device factory settings
11. DATABASE: Querying the working pressure of various vehicle models' fuel systems
12.HELP : Querying device fault code information
● Standard test mode and professional test mode
📸 Main Unit Layout Guide
Fill Port
Pulse Cable Socket
Washing Basin
Test Agent Output Tube
Power Switch
Power Socket & Fuse
Type-C Upgrade Port
Oil Distributor
Measuring Glasses
Control Panel
Level & Drain Tube
Washing Basin Drain Port
CLEANER TESTER
This product is a professional cleaning and testing equipment for automotive engine fuel injectors
💛Injector Test
Detect solenoid injectors voltage/resistance and Minimum Pulse width. Detect piezoelectric injector the minimum opening opening voltage.
💛UNIFORMITY TEST
Inspect fuel injection of each injector by observing its uniformity.
💛SPRAYABILITY TEST
Inspect atomization of each injector by observing.
💛LEAKAGE TEST
Inspect the sealing conditions of the injector needle valve under system pressure and to
find out the injector with oil droplet.
💛INJECTION TEST
Inspect injecting volume in 10 seconds meets the design specifications.
💛AUTO MODE test
Inspect the injectors according to the established program1 of the equipment
💛VARIABLE SPEED TEST
Inspect the injectors in variable speed conditions
💛ULTRASONIC TEST
Clean the carbon deposits inside the fuel injector through ultrasonic
💛ON-VEHICLE CLEAN
Cleaning the engine fuel supply pipeline, injector, and combustion chamber with the
machine does not require disassembling.
🎯 Wide Range of Injector Types
● Traditional Injectors
● GDI Injectors
Ultrasonic Cleaning Operation:
1.Pour in the injector detergent and place the injectors in the ultrasonic cleaner tank.
2.Connect the pulse signal wire and select the ultrasonic cleaning function to start working.
Fuel Injector Testing Operation:
1. Pour in the test liquid,install the fuel injector is to the fuel dstributor and fix main unit body
2. Test if the injector is leaking or blocked under different functions.
How to choose test fluid?
The test fluid is used to test and judge whether the performance of the fuel injector is in good condition. It is a colorless and transparent liquid with no irritating odor, non-corrosive, and not easy to emit. Its function is to simulate various working states of the fuel injector as a medium. In order to achieve the best test effect, it is recommended to use professional automotive injector test fluids. If it is not available locally, as an alternative, it's recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the test fluid.
How to choose cleaning fluid?
Cleaning fluid is used to clean deposits (such as carbon deposits) on fuel injectors, and it is usually highly corrosive and flammable. In order to achieve the best test effect, it is recommended to use professional injector ultrasonic cleaning fluid. If it is not available locally, it's recommended that medical alcohol with an alcohol content of more than 75% can be used instead of the cleaning fluid, but note that the effect may not good enough.
Injector Installation Example (Top Feed Injector)
● Fixing Screw
● Directly Drain Couplers
● Top Supply Injectors
● Regulative Screw
● Top Supply Distributor
● Knurled Nut
Note: Injectors are not included.
Specifications
Voltage：AC220V or 110V，(customized)
Main-unit Max Power：300W
Display: 4.0 inch LCD
Ultrasonic power：60W
Pulse range：0.5～25ms ，step 0.1ms
Simulated speed：100～9900rpm ，step100rpm
Resistance measuring precision: 0.1 ohm
Tank volume：3L
Oil pressure: 0~8 bar
Main unit size: 420X440X503mm
Ambient temperature：-10℃~+40℃
Package size: 460*490*555mm
Ambient Humidity：＜85%
Ambient magnetic strength：＜400A/m
📦 Package Contents (Full Set, Ready to Use)
Main Unit x1
4-Cylinder Pulse Signal Cable x1
Pulse Signal Connection Cable (Multiple Types) x4 each
Fuel Injector Adapters (For Top-Supply/GDI/Swiss Thread/Coarse Thread) x4 each
Fuel Distributor Package x1
Adjusting Pole (H180) x1
Pressing Screw x1
Ultrasonic Cleaner Cover x1
Power Cable, Toolbox, User Manual, etc.
1) The unit does not respond when the power is turned on.
Check the fuse on the lower right side of the unit and replace the fuse (5A) if it is damaged or broken.
2) Fuel distributor (rail) is leaking.
Check the o-ring and replace if damaged or broken. Do not tighten the adapter fitting too much,
otherwise, it may cause leakage.
3) When running, there is no working pressure.
When using a new machine for the first time, or if the machine has not been used for a long time, there may be no fuel
pressure. In this case, select the "first time use" function in the system functions, and then do the following:
a) Connect the test connector to the unit's fuel supply line and insert it into the fuel filler neck as shown in the illustration.
b) Then, run the first time use function.
c) When liquid comes out of the test connector, stop the operation. The device stops automatically after 30 seconds of operation.
4) There is no oil feed pressure, the buzzer sounds.
The machine has a lack of fuel warning function, when there is not enough fluid in the tank, the machine will beep, then
automatically shut down the fuel pump and injector nozzle, and return to the stop state. Add test fluid to the unit until the
buzzer stops beeping.
5) Completely emptying the test fluid from the glass tube requires pressing the Drain button several
times.
The solenoid valve will automatically stop after 15 seconds and will need to be emptied more times if more fluid is present.
Precautions
a) 1)Do not place anything on the control panel to prevent breaking the test measuring cup/glass panel.
b) 2) Do not disconnect the oil feed connection until the system pressure reaches "0" to prevent test fluid from spraying out.
c) 3) Always ensure that the unit is reliably earthed when in use.
d) 4) The device has a lack of oil alarm function. When the liquid level falls below the minimum line, the device will emit a warning
sound and at the same time automatically stop the oil pump and injector nozzle work. Until the test liquid is sufficient, the
equipment will be able to work normally.
e) 5) Clean the control panel in time, pulse signal line please ask stained test liquid, cleaning agent.
WARNING
Do not disassemble this equipment for servicing without authorized personnel. Damage resulting from this is not covered
by the warranty. In the energized state, there is strong electricity inside the device and the housing must not be opened. It is
strictly forbidden to repair the equipment with electricity! All injuries resulting from violation of this warning are not
covered!
Arrangement after use
a) It need to do some job as below after use.
b) Press the "Drain" icon to drain the test fluid into the fuel tank.
c) Turn off and pull of the power plug.
d) Clean the machine with a soft cloth.
e) Drain the test fluid from the fuel tank into a container to avoid evaporation. If reuse, store the it in a safe place and dispose of it
according to the relevant regulations if it is too dirty
