50Pcs 1/4x15 (1/4-20UNC) Ceiling Fan Blade Screws, Silver
What is this?
These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.
What will i get?
Ceiling Fan Blade Screws
Color: Silver;
Material: Carbon Steel;
Total Size: 8.6 x 18mm/0.34 x 0.71 Inch (DxL);
Thread Size: 1/4“-20 UNC;
Thread Length: 15mm/0.59 Inch.
Are there any advantages of the product?
Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.
Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.
Universal Fit: Suitable for Most ceiling fans.
Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
How to use it?
1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.
2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.
3. Insert & Tighten: Hand-start the screw, then secure diagonally
What should I notice?
1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.
2. Compatibility: For wood/composite blades only; Metal blades require longer screws.
3. Storage: Keep in a sealed bag to prevent washer oxidation.
4. Replacement Tip: Replace all screws per fan.
These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.
What will i get?
Ceiling Fan Blade Screws
Color: Silver;
Material: Carbon Steel;
Total Size: 8.6 x 18mm/0.34 x 0.71 Inch (DxL);
Thread Size: 1/4“-20 UNC;
Thread Length: 15mm/0.59 Inch.
Are there any advantages of the product?
Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.
Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.
Universal Fit: Suitable for Most ceiling fans.
Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
How to use it?
1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.
2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.
3. Insert & Tighten: Hand-start the screw, then secure diagonally
What should I notice?
1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.
2. Compatibility: For wood/composite blades only; Metal blades require longer screws.
3. Storage: Keep in a sealed bag to prevent washer oxidation.
4. Replacement Tip: Replace all screws per fan.
Hot Item
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.
50Pcs 1/4x15 (1/4-20UNC) Ceiling Fan Blade Screws, Silver
What is this?
These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.
What will i get?
Ceiling Fan Blade Screws
Color: Silver;
Material: Carbon Steel;
Total Size: 8.6 x 18mm/0.34 x 0.71 Inch (DxL);
Thread Size: 1/4“-20 UNC;
Thread Length: 15mm/0.59 Inch.
Are there any advantages of the product?
Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.
Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.
Universal Fit: Suitable for Most ceiling fans.
Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
How to use it?
1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.
2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.
3. Insert & Tighten: Hand-start the screw, then secure diagonally
What should I notice?
1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.
2. Compatibility: For wood/composite blades only; Metal blades require longer screws.
3. Storage: Keep in a sealed bag to prevent washer oxidation.
4. Replacement Tip: Replace all screws per fan.
These industrial-grade ceiling fan blade screws are precision-engineered fasteners designed to eliminate blade wobble and motor vibration. Featuring Phillips pan heads and with washers, they provide permanent stability for fan blades and motor assemblies. Made from corrosion-resistant stainless steel, they outperform standard zinc-plated screws in humid environments.
What will i get?
Ceiling Fan Blade Screws
Color: Silver;
Material: Carbon Steel;
Total Size: 8.6 x 18mm/0.34 x 0.71 Inch (DxL);
Thread Size: 1/4“-20 UNC;
Thread Length: 15mm/0.59 Inch.
Are there any advantages of the product?
Zero Vibration Make Sure: washers absorb operational vibration preventing screw loosening and noise.
Corrosion-Proof: stainless steel withstands bathroom/coastal humidity without rust on ceilings.
Universal Fit: Suitable for Most ceiling fans.
Tool-Friendly: Deep Phillips drive slots resist stripping, even with high-torque drivers.
How to use it?
1. Remove Old Screws: Use a Phillips screwdriver to extract worn or rusted blade/motor screws.
2. Align Blade & Bracket: Position the fan blade mount hole against the motor bracket.
3. Insert & Tighten: Hand-start the screw, then secure diagonally
What should I notice?
1. Torque Limits: Never exceed 15 in-lb – over-tightening cracks plastic blade mounts.
2. Compatibility: For wood/composite blades only; Metal blades require longer screws.
3. Storage: Keep in a sealed bag to prevent washer oxidation.
4. Replacement Tip: Replace all screws per fan.
Hot Item
- We accept eBay payment.
- Please do not email us to ask for other payment option.
- We appreciate prompt payment and look forward to your business in the future. Unpaid item will be filed without receiving payment in 7 days from listing ended.
- Usually we ship your order out within 24 hours in business day.
- For shipping and handling charges (S&H) for specific item, please refer to the item listing page for more details.
- Please make sure your shipping address is correct. We are not responsible for any loss in transit if a wrong address is provided.
- Returns for exchange are permitted and must be initiated by the buyer within 30 days upon receipt.
- If you would like to return your product(s) for repair / replacement / refund, please kindly contact our customer service representatives via email for an authorized RMA number. Your returned product(s) will not be processed without a completed RMA.
- We are continually expanding our product selection to better serve your need.
- We look forward to providing the best sevice to you - our dear customers, so take a look around our store and find the product that you want. You can put your trust in us!
- If you need any help or have any suggestions, please don't hesititate to contact us anytime , we will reply you within 24 hours and try the best to help you.