Citroen / Fiat / Peugeot / Toyota Stereo Upgrade Fitting Kit 621040‑02‑2

Everything you need for a seamless Double DIN installation (stereo not included)

Upgrade your factory stereo with this complete installation kit from ACV, designed for Citroen, Fiat, Peugeot, and Toyota vehicles. This all-in-one solution allows you to fit an aftermarket Double DIN head unit while retaining steering wheel controls, antenna connectivity, and PDC chimes, depending on vehicle configuration.

What’s Included in the Kit
• 2-DIN fascia plate Citroen/Fiat/Peugeot/Toyota black – item: 381040‑02‑1
• SWC Citroen/Fiat/Peugeot/Toyota Multilead RD4 OEM HU bulk – item: 42xpg007‑0
• Antenna adapter Fakra(m) > DIN(m) 12V phantom power bulk – item: 1524‑03‑0

Compatible Vehicles

Citroen
• Berlingo (7) 06/2008 – 03/2012
• Berlingo (7) 04/2012 – 05/2015
• Berlingo (7) 06/2015 – 06/2018
• C2 (J) 12/2004 – 12/2009
• C3 (F) 10/2005 – 01/2010
• C3 Pluriel (H) 01/2003 – 04/2008
• C3 Pluriel (H) 04/2008 – 02/2010
• Jumpy (X) 02/2007 – 03/2012
• Jumpy (X) 03/2012 – 05/2016

Fiat
• Scudo (ZAF 270) 02/2007 – 07/2016

Peugeot
• 207 (W) 06/2006 – 06/2009
• 207 (W) 06/2009 – 07/2015
• 307 (3 / 3 Break / 3 SW / 3 CC) 06/2005 – 03/2009
• Expert (X) 02/2007 – 03/2012
• Expert (X) 03/2012 – 08/2016
• Partner / Partner Tepee (7) 05/2008 – 03/2012
• Partner / Partner Tepee (7) 03/2012 – 04/2015

Toyota
• ProAce 06/2013 – 07/2016

Vehicle Requirements / Notes
• Vehicles with Blaupunkt / Continental / Siemens VDO RD4 OEM HU with volume knob
• Vehicles without Bosch OEM HU
• Vehicles without Continental RD45 OEM HU with volume knob**
• Vehicles without Magneti Marelli RT3 / RT6 / Harman Becker OEM Sat Nav
• Vehicles without JBL OEM amplified system
• Vehicles with PDC rear – Chimes Interface BMW/Citroen/Peugeot/Fiat/Ford/Volvo > item: can-pdc*
• Vehicles with PDC switch – PDC chime function must be activated
• Vehicles with ECO mode – +12V continuous current clamp 30 to battery fused
• Vehicle settings supported (see manual)
• Dip switch settings for retrofit device (see manual)

Stereo Compatibility
• Designed for aftermarket Double DIN head units
• DIN / ISO compatible
• SWC signals supported
• PDC rear supported

Wiring and Connections
• 40 Pin Quadlock Citroen / Peugeot connector
• OEM SWC > 3.5 mm Jack / loose wire
• OEM antenna Fakra(m) > DIN(m)
• OEM AUX > RCA(m) red / white
• OEM rear view camera > RCA(m) yellow
• Blue: +12V antenna remote
• Red: +12V ignition clamp 15
• Orange: +12V illumination clamp 58
• Purple/white: +12V reverse gear signal
• Pink: speed pulse signal
• Green: GND park brake signal
• Load capacity outputs: 250 mA max.
• Current > 250 mA: use relay coil resistance 75–150 Ohm depending on configuration

Important Installation Information
• Professional installation recommended
• Verify all OEM HU functions and vehicle settings before disconnecting
• Installation template included
• Connect retrofit HU according to manual
• Software configuration of interface required per instructions
• Verify steering wheel control, PDC, and other functions before final assembly
• Modifying pre-assembled wiring harness may void warranty

Steering Wheel Control Setup
• Retains OEM steering wheel audio controls when connected to compatible radios
• Configuration changes can be made voltage-free following included instructions

Why Choose This Kit
• Complete solution with fascia, SWC, and antenna adapters included
• Maintains steering wheel controls, PDC chimes, and key vehicle functions
• OEM-style fascia ensures professional dashboard appearance
• Designed for Citroen / Fiat / Peugeot / Toyota dashboards and electrical systems

Condition
Brand New · In Stock · Fast UK Shipping – Order Now to Upgrade Your Car Audio System!