MODEL N79WW

FASTENER SPECIFICATIONS:

This tool uses a wide range of nail sizes in lengths of 2" to 3-1/2" (50 - 90mm) and shank diameters of .113" to

.131" (2.8 - 3.3mm)

TOOL AIR FITTING:

This tool uses a 1/4" N.P.T. male plug. The inside diameter should be .275" (7mm) or larger. The fitting must

be capable of discharging tool air pressure when disconnected from the air supply.

OPERATING PRESSURE:

70 to 100 p.s.i.g. (4.9 to 7.0 kg/cm2). Select the operating pressure within this range for best fastener

performance. DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.

AIR CONSUMPTION:

The N79WW/N80SB requires 7.8 cubic feet per minute (221 liters per minute) of free air to operate at the rate

of 100 nails per minute, at 80 p.s.i. (5.6 kg/cm2). Take the actual rate at which the tool will be run to determine

the amount of air required. For instance, if your fastener usage averages 50 nails per minute, you need 50%

of the 7.8 c.f.m. (221 liters per minute) which is required to operate the tool at 100 nails per minute.