Application
It is suitable for milling barley, wheat, and other grains, which are very suitable for self-made beer brewing.
Adjustable Clearance
- Loose the 2 bolts on both ends;
- Spin the right knob to get a proper clearance;
- Spin and make sure you've got the same place for the left knob;
- Tighten the 2 bolts to fix the rollers.
Specifications
Color: Silver
Style: Modern
Speed: Manual
Assembly Required: Yes
Mount Type: Bucket(Not Included)
Recommended Uses For Product: Grinding
Material: Carbon Steel, Stainless Steel, Aluminum
Capacity: 4L/1.06gal
Discharging Granularity: 0.2mm
Hopper Load Bearing: 4.99kg/11lbs
Adjustable Distance Between Rollers: 0-2.5mm/0-0.098inch
Product Height: 26.6cm/10.47inch
Base Size: 15.2*7.6cm/5.98*2.99inch
Roller Size(L*D): 15*3.8cm/6*1.5inch
Funnel Opening Size: 21.6*21.6cm/8.5*8.5inch
Crank Handle: 11.4cm/4.49inch
Package Size: 23*29.5*15.5cm/9.06*11.61*6.1in
Gross Weight: 3.1kg/6.83lbs
Net Weight: 2.95kg/6.5lbs
Package Included
1*Grain Mill Grinder
2*Aluminum Strips
All Needed Accessories
Notes
- Please check the size carefully before ordering. Note: This product is not suitable for corn and can only be used for grains with a diameter less than 1.5mm.
- The product does not include an electric drill. You will need to supply or build a base to set the mill over a grain bin or 5-gallon bucket(not included). Grinding speed for hand crank operation depends on the individual.
- Please note that it is only used for grinding and crushing dry grains. Not for legumes, moist grains, or flours.
- If you receive the machine with oil, you can use a clean towel to wipe the machine, and then use some malt cereals to repeatedly grind 1-2 times, and finally wipe it clean.
- If rotating at high speeds, momentary jamming and stopping when there is debris can cause arm injuries. You can contact us to send you the installation and operation videos for your reference.
- Please make sure it does not have friction with the internal rollers when the hopper is installed, if there is friction, please adjust the hopper manually.
- Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
