Light your sink up and add a conversation piece to your bathroom with Y-Garhe Waterfall Bathroom Faucet with LED Light!

Please be sure to make sure your water pressure meets the faucet's working needs before purchasing to save time on exchanges.

How do I test my water pressure?

Testing Low Water Pressure

Before you start, you’ll need some tools to complete your test. These include:

• A measuring jug (preferably a 1-litre jug but anything above or below works too)
• Timer (a timer on a phone usually works, however, be careful around water with your phone)
• Calculator (again, usually on your phone)

Step 1: Place a 1-litre measuring jug under the shower or tap.

Step 2: Turn the problem tap or shower on full.

Step 3: Time how long it takes to fill the jug.

Step 4: If it takes more than 6 seconds to fill the jug, then you have low water pressure which means that your water pressure does not meet the requirements of this faucet.

Help - I don’t have a 1-litre jug!

If you don’t have a 1-litre jug (they often vary in size, some can be 500ml, 800ml), then you can use some simple maths to calculate the water pressure.

Simply, take the amount of water in the jug in litres and multiply this by 10. This will give you your flow rate in litres per minute.

For example, if you have a 500ml jug, that would be 0.5 litres x 10 = 5 litres per minute.

*You can also download the water pressure measurement guide in the "Product guides and documents" section.

Waterfall Faucet with 3 Colors Changing LED Light, NO Batteries and Plug Required!

This single-handle bathroom sink faucet has a wide spout, which creates a natural waterfall effect when the water flows to the basin. It has a built-in color-changing LED light and a temperature sensor, which makes the LED light change with the temperature of the water, full of technology and very cool, you can easily create a festive atmosphere in the bathroom.

How Does LED Faucet Work?

The motor inside forces the turbine inside the faucet to spin as the water flows through, which creates friction within the motor and then energy, so no battery is needed, once you have this cool gadget, you don't have to worry about batteries, and also these LED faucets are rust and corrosion-free.

Visualize Water Temperature.

An LED light in your faucet is a great way to determine the water temperature, it changes from blue to green, and then red depending on how hot or cold the water is, so these LED faucets work well in the nighttime or when the light is dim, they can fit easily into almost any standard sink and provide a splash of color to any bathroom.

Safety, Fun, and Luxury Complete in One Step!

One of the best things about these LED faucets is that they come in 3 changing colors, which adds a fun and festive touch to your home, they are also waterproof, you won’t have to worry about the lights shorting out or causing any other damage to your home. Bathroom sink faucet like this has a luxurious feel to them, they add a touch of elegance to any bathroom.

Please note this LED bathroom faucet will ONLY fit SINGLE HOLE or 4-INCH CENTERSET SINK COUNTERTOPS (Optional 6.3" deck plate included)

Please check your sink size before purchasing to save time on exchanges.

*Before installation, please check whether all accessories are complete, and also please pass water first to remove impurities in the water pipe to prevent impurities from clogging the hydraulic press.

Here is the packing list:

• LED Bathroom Sink Faucet × 1
• Hoses × 2
• Deck Plate × 1
• O-ring x 1 (Built-in)
• Rubber Gaskets × 1
• Fixed Nut × 1
• Lock Nut × 1
• Gloves
• Seal Tape

We want to hear from you!

Tell us what you think about our LED faucets. It helps us get better at what we do, and ultimately provide you with better products.