Stator for Yamaha YXE 850 Wolverine X2 2019-2024 | YXE 850 Wolverine X4 2018-2024 | OEM Repl.# BG4-81410-00-00
 
KEY FEATURES
 

Brand new aftermarket stator

Pick up pulsar coil, connector and Rubber grommet included

Plug-and-play, direct fit, easy installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

All products shipped are tested

DESCRIPTION

 

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

Brand new aftermarket Stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Pick up pulsar coil included
  • Connectors included
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.

Vehicle models fitment

 

Yamaha YXE 850 Wolverine X2 -- 2019-2024
Yamaha YXF 850 Wolverine X4 -- 2018-2024
Yamaha YXF 850 Wolverine XE -- 2021

OEM part replacement

 

BG4-81410-00-00

Specifications

 

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 115 mm
Thickness : 22 mm
Length of wires stator to grommet : 150 mm
Length of wires grommet to plug : 315 mm
Length of pickup coil's wire to grommet : 70 mm

Other specifications :
Number of wires : 5
Number of plugs : 3
Number of pins : 5
Number of poles : 18

Wire to wire resistance :
Alternator : White to White = 0.5 ohms +-20%
Pickup : Grey to Black = 509 ohms +-20%

instructions

 

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulator rectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Warning:

Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.

Item Delivery

 

Our multiple North American locations, from which we ship our products, allows us to deliver 99.7% of our orders within the specified time period. If your item is not available in our main New Jersey facility, we still guarantee that your order will be delivered within the specified time period.

This guarantee applies to shipments delivered in the 48 continental USA states, excluding PO boxes.