For GM LS Truck Camshaft Kit Stage 3 Cam Valve Springs Seals 4.8 5.3 6.0 6.2
CAM SPECS: 218/224 .553”/.553” 110LSA
The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! With more average torque than the V1 Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.
The Stg III cam has a noticeable cam sound that so many are looking for. It will make even more average torque than the Stg II cam, at the sacrifice of some low end torque and fuel mileage.
Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance.
This is a 3-bolt cam (Gen III LS), if you have a single bolt cam (Gen IV LS) you will need to purchase 3-bolt cam gear conversion kit.
.560 LS6 VALVE SPRINGS:
.560" Lift LS6 Beehive Springs. Spring specs are 100 lbs @ 1.800", 285 lbs @ 1.240", coil bind @ 1.150", set of 16.
LS HAT SEALS:
LS Valve Seal Kit for stock powdered metal guides with built in locators for single springs. *Will not work with dual springs*
Fitment :
For 99-13 General Truck Application
Package Included:
1 *Stage 3 Truck Cam
16*.560 LS6 Honeycomb Valve Spring
16*LS hat seal
Notice:
Please don't open cases or return requests without contacting me.
If you have any questions about quality, shipping or other problems, please contact me first via eBay message.
I will give you a satisfy solution.
 

 If you have any questions,you can contact us,we will provide the best service for you.

The item will be shipped within 24 hours on payment received except the holidays.(except weekends & official holidays). You can log on to eBay to check your logistics tracking number.

Please confirm address before purchase, and cannot change address once purchased.

If you need to receive the item quickly, please contact us, you can pay the postage to choose other logistics.

Please purchase and pay for the item through the eBay,only accpected the paypal payment.

Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.

Item must be returned in new condition, as received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect.

Our goal is complete customer satisfaction. We will be very honored to provide you with quality service.

If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.

For GM LS Truck Camshaft Kit Stage 3 Cam Valve Springs Seals 4.8 5.3 6.0 6.2
CAM SPECS: 218/224 .553”/.553” 110LSA
The Stage 3 V2 camshaft is an amazing all around grind for the truck enthusiast. You sacrifice some low end torque in the pursuit of more power higher in the RPM range, but gain an idle note that is distinctly BTR! With more average torque than the V1 Stage 3 grind, it is still a tow-friendly camshaft, just not ideal for the everyday hauler. An aftermarket converter is highly recommended with this grind.
The Stg III cam has a noticeable cam sound that so many are looking for. It will make even more average torque than the Stg II cam, at the sacrifice of some low end torque and fuel mileage.
Will work with stock converter in some trucks, but recommended to install a 2800-3000 converter for best overall performance.
This is a 3-bolt cam (Gen III LS), if you have a single bolt cam (Gen IV LS) you will need to purchase 3-bolt cam gear conversion kit.
.560 LS6 VALVE SPRINGS:
.560" Lift LS6 Beehive Springs. Spring specs are 100 lbs @ 1.800", 285 lbs @ 1.240", coil bind @ 1.150", set of 16.
LS HAT SEALS:
LS Valve Seal Kit for stock powdered metal guides with built in locators for single springs. *Will not work with dual springs*
Fitment :
For 99-13 General Truck Application
Package Included:
1 *Stage 3 Truck Cam
16*.560 LS6 Honeycomb Valve Spring
16*LS hat seal
Notice:
Please don't open cases or return requests without contacting me.
If you have any questions about quality, shipping or other problems, please contact me first via eBay message.
I will give you a satisfy solution.
 

 If you have any questions,you can contact us,we will provide the best service for you.

The item will be shipped within 24 hours on payment received except the holidays.(except weekends & official holidays). You can log on to eBay to check your logistics tracking number.

Please confirm address before purchase, and cannot change address once purchased.

If you need to receive the item quickly, please contact us, you can pay the postage to choose other logistics.

Please purchase and pay for the item through the eBay,only accpected the paypal payment.

Please contact us first when return, exchange and refund is required. Any direct return of purchased items will not be processed.

Item must be returned in new condition, as received with all accompanied accessories and literature, including the factory carton. Shipping, handling is not refundable unless item is returned because of defect.

Our goal is complete customer satisfaction. We will be very honored to provide you with quality service.

If there is an issue with shipping or the item you purchased please contact us via ebay message or call us before opening a case or leaving feedback.We will try our best to resolve any kind of issue.


On Mar 23, 2026 at 20:47:10 PDT, seller added the following information:

Datacaciques